Bedienungsanleitung Philips 32PHK4101 (Seite 28 von 62) (Englisch)

634581

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Child lock code

You can set or change the Child lock code.

To set the lock code or to change the current code . . .

1. Press

and select Setup and press OK.

2. Select Satellite settings > Child lock > Set

code or Change code and press OK.

3. If a code is set already, enter the current Child lock

code and then enter the new code twice.

The new code is set.

Forgotten your Child lock code?

If you forgot your code, you can override the current

code and enter a new code.

1. Press

and select Setup and press OK.

2. Select Satellite settings > Child lock > Change code

and press OK.

3. Enter the overriding code 8888.

4. Now enter a new Child lock code and enter it again

to confirm.

8.5

Satellite installation

About installing satellites

This TV has a built-in satellite DVB-S/DVB-S2

receiver. Connect the cable from your satellite dish

directly to the TV. Use a coaxial cable fit for

connecting a satellite antenna dish. Make sure your

satellite dish is perfectly aligned before you start the

installation.

Up to 4 satellites

You can install up to 4 satellites (4 LNBs) on this TV.

Select the exact number of satellites you wish to

install at the start of the installation. This will speed up

the installation.

Unicable

You can use a Unicable system to connect the

antenna dish to the TV. Select if you are installing

satellites for a Unicable system, for 1 or for 2 satellites

at the start of the installation.

Start the installation

You can install your satellites during the initial TV

setup. If you only watch satellite channels, you can

skip the TV channel installation.

You can always start a new satellite installation from

the Setup menu.

To install satellite channels . . .

1. Press

and select Setup and press OK.

2. Select Search for satellite and press OK.

3. Select Install satellites and press OK.

4. The TV shows the current installation setting. If the

current setting corresponds with the satellite

installation you want, you can start searching for

satellites. Select Search and press OK. Go to step 5. If

the current setting is not the setting you want, select

Settings and press OK. Go to step 4b.

4b - In the Settings menu, select the exact number of

satellites you want to install. Or, if you use a Unicable

setup, select Unicable for 1 satellite or Unicable for 2

satellites according the number of satellites you want

to install for Unicable. Select the setting you want and

press OK.

4c - If the exact number of satellites is set or you

completed the Unicable settings, select Search and

press OK.

5. The TV will search for satellites available on the

alignment of your antenna dish. This may take a few

minutes. If a satellite is found, its name and reception

strength are shown on screen. If a channel package

is available for any of the satellites found, you can

select the package you want.

6. To install the channels of the satellites found,

select Install and press OK. The TV shows the number

of channels and radio stations found.

7. To store the satellite settings, all satellite channels

and satellite radio stations, select Finish and press

OK.

Satellite installation settings

The satellite installation settings are preset according

your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings…

1. Start the satellite installation.

2. On the screen where you can start searching for

satellites, select Settings and press OK.

3. Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4. When you're done, select Next and press OK.

5. On the Settings menu, press the colour

key



Done to return to the screen to start

searching for satellites.

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PHK4101 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PHK4101

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info