Bedienungsanleitung Philips 32pw9505 (Seite 13 von 32) (Englisch)

52756

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

13Use of the menus

Surround settings menu

Select Surround settings in the Sound menu.

With no extra loudspeakers connected

Do not change the predefined factory settings of Extra front or rear speakers in the

Setup menu, p. 7.

Note: you can select only those surround modes which can be used with the

broadcasted signal.

The graphical representation of the TV speakers is displayed and updated

according to the selected surround mode. Speakers which are active are

highlighted.

3D surround mode, which enables you to experience the effect of Dolby

Surround Pro Logic, is represented by the symbol ®r.The menu item

3D effect appears in which the level of the 3D effect can be selected.

Adjustment of the volume level of the loudspeakers

The menu item

Test which only appears in Dolby 3 Stereo and 3D Surround

mode, enables you to have a reference of the loudness of the internal

loudspeakers.

& Select Dolby 3 Stereo or 3D Surround.

é Select Test start and press the OK key in the centre of the cursor.

A steady noise tone is switched sequentially through the loudspeakers.The

loudspeakers activated light up in the screen graphic.

“ Select Centre volume or Balance and alter the selected adjustment.

‘ Select Test stop and press the OK key in the centre of the cursor when you

have finished the adjustment of the speaker levels.

Surround mode

Select the Surround Sound mode according to the sound mode being

broadcast.

3D Surround (optimal with Dolby Surround broadcasting)

3D Surround enables you to experience the effect of Dolby Surround Pro

Logic without the need of having rear speakers connected.

The graphical representation of the rear loudspeakers is replaced by the

symbol ®r.

Select the level of

3D effect with the cursor left/right.

Dolby 3 Stereo (optimal with Dolby Surround broadcasting)

The sound signal is now distributed over the front left, the front right and the

centre loudspeaker.

Stereo

This mode reproduces only the left and right front sound signals.

You only hear a stereo sound if the broadcast which you are receiving is

transmitted in stereo or digital sound.

Press the Ï key to return to the

SOUND menu.

Go on with page 16.

Dolby 3 Stereo

Surround settings

Test start

Test stop

Centre volume

Balance

3D effect

Surround mode

••

•••

•

•••

••

Available menu items in case of the selected

and available Surround modes.

Stereo

3D surround

Surround settings

Test start

Test stop

Centre volume

Balance

3D effect

Surround mode

‘Dolby’ ‘Pro Logic’ and the double-D symbol are

trademarks of Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories

Licensing Corporation.

3D Surround

Dolby 3 Stereo

Stereo

4916.2 gb 18-01-2000 16:43 Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32pw9505 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32pw9505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info