2
Care of the screen
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the
screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare
hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the
screen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible.Their long
time contact with the screen causes deformations and colour fading.
Warning concerning stationary images on the TV screen
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a
permanent after-image to remain on the screen.This is called phosphor burn in.
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing
images that fill the screen.
Preparation
& Ta ble stand instructions
How to mount the supplied stand, see the
supplied Quick Start Guide.
Note: Other (not supplied) stands are optional
accessories. Consult your dealer.
é For ventilation, leave at least 5 cm free all
around the TV.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed in the vicinity.Avoid heat, direct
sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing.
“ Insert the aerial plug firmly into the aerial
socket x at the bottom of the TV.
For best picture quality use the suppressor-
aerial cable supplied.
‘ Insert the mains cord supplied into the mains
at the bottom of the TV and in the wall socket
having a mains voltage of 220-240V 50/60Hz.
To prevent damaging the power (AC) cord
which could cause a fire or electric shock, do
not place the TV on the cord.
(
Remote control: Pull out the plastic insulation
sheet from the battery, this will activate the
remote control.
The battery supplied with
the appliance does not
contain mercury or nickel
cadmium so as to protect
the environment. Please
do not discard your used
batteries, but use the
recycling methods
available (consult your
distributor).
§ To s witch on the set, press the B key on the
TV. An indicator comes on and the screen
lights up. Go straight to the Quick Installation
chapter, p. 5.
If the TV remains in standby mode (red
indicator), press the
-P+ key on the remote
control.
The indicator will flash when you use the remote
control.
