Connect a VCR or DVD recorder
4242
Warning: do not place your recorder too close to the screen as some recorders may be susceptible
for signals from the display. Keep a minimum distance of 0,5 m from the screen.
With a eurocable
1. Connect the RF Antenna cable 1 to the RF
IN
socket of your recorder.
2. Connect another RF cable 2 from the output
OUT of your recorder to the TV’s input
CABLE/ANTENNA 75 ø x jack.
3. Better playback quality can be obtained if you
also connect the eurocable 3 as shown.
4. Make your selection of the source to which
the recorder has been connected in the
Installation menu, Select your connections,
p. 30.
With the aerial cable only
1. Connect the aerial cables 1 and 2 as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Manual installation, p. 27.
See also the handbook of your recorder.
Note: Use the scart to cinch adaptor (with the
switch in the
IN
position) to connect
(temporary) peripheral equipment to
EXTERNAL 1
or
2
.
