Bedienungsanleitung Philips 40PFK6300 (Seite 10 von 57) (Englisch)

578371

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Audio Out offset

If you cannot set a delay on the Home Theatre System, you can

set the TV to sync the sound. You can set an offset that

compensates the time necessary for the Home Theatre System

to process the sound of the TV picture. You can set the value in

steps of 1ms. Maximum setting is 12ms. The Audio out delay

setting should be switched on.

To synchronise the sound on the TV . . .

1. Press

and select

Setup

and press

2. Select

TV settings

Sound

Advanced

Audio out offset

3. Use the slider bar to set the sound offset and press

4. Press



, repeatedly if necessary, to close the menu.

Audio Out format

If you have a Home Theatre System (HTS)

with multichannel sound processing capabilities like Dolby

Digital, DTS® or similar, set the Audio out format to

Multichannel. With Multichannel, the TV can send the

compressed multichannel sound signal from a TV channel or

connected player to the Home Theatre System. If you have a

Home Theatre System without multichannel sound processing,

select Stereo.

To set the Audio Out format . . .

1. Press

and select

Setup

and press

2. Select

TV settings

Sound

Advanced

Audio out

format

3. Select

Multichannel

Stereo

4. Press



, repeatedly if necessary, to close the menu.

Audio Out levelling

Use the Audio Out leveling setting to level the volume

(loudness) of the TV and the Home Theatre System when you

switch over from one to another. Volume differences can be

caused by differences in sound processing.

To level the difference in volume . . .

1. Press

and select

Setup

and press

2. Select

TV settings

Sound

Advanced

Audio out

leveling

3. If the volume difference is large, select

. If the volume

difference is small, select

Less

Press



, repeatedly if necessary, to close the menu.

Audio Out leveling affects both the Audio Out - Optical and

HDMI ARC sound signals.

Problems with HTS sound

Sound with loud noise

If you watch a video from a plugged in USB flash drive or

connected computer, the sound from your Home Theatre

System might be distorted.

1. Press

and select

Setup

and press

OK.

2. Select

TV settings

Sound

Advanced

Audio out

format.

No sound

If you cannot hear the sound from the TV on your Home

Theatre System, check the following . . .

- Check if you connected the HDMI cable to a

HDMI

ARC

connection on the Home Theatre System. All HDMI

connections on the TV are HDMI ARC connections.

- Check if the

HDMI ARC

setting on the TV is switched

Go to

Setup

TV settings

Sound

Advanced

HDMI

1 -ARC

3.7

Blu-ray Disc player

Use a

High speed HDMI

cable to connect the Blu-ray Disc

player to the TV.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can

operate the player with the TV remote control.

3.8

DVD player

Use an HDMI cable to connect the DVD player to the TV.

Alternatively, you can use a SCART cable, if the device has no

HDMI connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFK6300 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFK6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info