Bedienungsanleitung Philips 40PFL4308H (Seite 33 von 62) (Englisch)

523810

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

EN 33

English

Manual installation

If a transponder is skipped during installation,

you can test the signal strength of a

transponder or add a new transponder.

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Manual installation], then press OK.

3. Select the LNB.

4. If you know the frequency of the

transponder (which can include several

channels), select [Frequency]and set the

frequency.

5. Select [Search], then press OK.

6. If a new frequency is found, press

[Store]to add the new transponder with its

channels.

Update satellite channels

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Update channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], and then

press OK.

Add and remove satellites

You can add or remove satellites at any

time, and install channels from new satellites.

Note: Before you add satellites, make sure

that the connection type is correct. See

Change your TV settings > Satellite Settings

> Install satellite channels (Page 32).

1. Press .

2. Select [Setup] > [Search for satellite],

then press OK.

3. Select [Add satellite], then press OK.

The TV searches for a satellite on the first

free LNB. This can take several minutes.

4. If no satellite is found, check the antenna

connections and the position of the dish

antenna, then select [Search again].

5. If you are satisfied with the added satellite,

select [Next] to install all channels from the

satellite.

The installation can take several minutes.

Remove a satellite

1. Press .

2. Select [Setup] > [Search for satellite] >

[Remove satellite], then press OK.

3. Select the satellites you want to remove,

then select [Remove] and press OK.

Language settings

Menu language

1. While you watch TV, press .

2. Select [Setup] > [TV settings] > [General

settings] > [Menu language].

3. Select a menu language from the list, then

press OK.

Audio language

If the TV channel broadcasts multiple or dual

audio languages, you can select your

preferred audio language.

1. While you watch TV, press OPTIONS.

2. For digital channels, select [Audio

language]. For analogue channels, select

[Dual I-II]. Press OK to confirm your

selection.

3. Select from the available languages, then

press OK.

You can set your preferred primary and

secondary audio languages to hear when

available.

1. While you watch TV, press .

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Languages].

3. Select [Primary audio language] or

[Secondary audio language] and select from

the available languages.

4. Press OK to confirm.

Subtitles on analogue channels

1. While you watch an analogue TV channel,

press TEXT.

2. Enter the three-digit page number of the

subtitles page, which is usually '888'.

If available, subtitles are switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFL4308H Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFL4308H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info