Bedienungsanleitung Philips 40PFL5507H (Seite 41 von 71) (Englisch)

475913

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

EN 41

English

Test signal strength

If a channel or transponder is skipped during

installation, you can test the signal strength of

a satellite or add a new channel.

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Manual installation], then press OK.

3. Select the LNB.

4. If you know the frequency of the

transponder (which can include several

channels), select [Frequency] and enter it.

5. Select [Search], then press OK.

6. If a new frequency is found, press

[Store]to add the new transponder with its

channels.

Update satellite channels

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Update channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], then press

OK.

Add and remove satellites

You can add or remove satellites at any

time, and install channels from new satellites.

Note: Before you add satellites, make sure

that the connection type is correct. See Set

up your TV > Satellite Settings > Install

satellite channels (Page Error! Bookmark not

defined.).

1. Press > [Setup] > [Search for

satellite], and press OK.

2. Select [Add satellite], then press OK.

The TV searches for a satellite on the first

free LNB. This can take several minutes. If no

satellite is found, check the antenna

connections and the position of the dish

antenna.

3. If no satellite is found, select [Search] to

scan again or [Next LNB] to skip to the

next LNB.

 If there are no free LNBs available,

remove a satellite first.

 If you are satisfied with the added

satellite, install the channels.

4. To install all channels, select [Install]. The

installation can take several minutes.

Remove a satellite

1. Press > [Setup] > [Search for

satellite].

2. Select [Remove satellite], then press OK.

3. Select the satellite you want to remove

and press OK.

The satellite and its channels are removed

from the installation.

Language settings

Menu language

1. While you watch TV, press .

2. Select [Setup] > [TV settings] >

[Preferences] > [Menu language].

3. Select a menu language from the list, then

press OK.

Audio language

If the TV channel broadcasts multiple audio

languages, you can select the preferred audio

language.

1. While you watch TV, press OPTIONS.

2. Select an option, then press OK.

 [Audio language]: Select the audio

language for digital channels.

 [Dual I-II]: Select the audio language for

analogue channels.

Audio languages for digital channels

For digital channels with multiple audio

languages, you can select the default audio

language that is broadcast.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Languages].

3. Select a setting, then press OK.

 [Primary audio]: If this language is

broadcast, it is selected by default.

 [Secondary audio]: If the primary audio

language is not broadcast, select this

language.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFL5507H Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFL5507H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info