Bedienungsanleitung Philips 40PFL5537H (Seite 36 von 71) (Englisch)

525788

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

EN 36

4 Set up your TV

Picture and sound

Settings assistant

You can select picture and sound settings

with the help of the settings assistant, which

demonstrates the effect of your chosen

setting immediately.

1. While you watch TV, press .

2. Select [Setup] > [Quick picture and

sound settings], then press OK.

3. Select [Start], then press OK.

4. Follow the onscreen instructions to

choose your preferred settings.

More picture settings

You can change the settings in the Picture

menu.

1. Press .

2. Select [Setup] > [TV settings] >

[Picture], then press OK.

3. Select a setting to adjust, then press OK.

Note: Options marked with a * are available

for certain models only.

 [Smart picture]: Access predefined

smart picture settings.

 [Reset]: Reset to default factory

settings.

 [Backlight contrast]: Adjust the

contrast of the TV backlight.

 [Brightness]: Adjust the intensity and

details of the dark areas.

 [Colour]: Adjust the level of colour

saturation.

 [Hue]: Compensate colour variations in

NTSC transmissions.

 [Sharpness]: Adjust sharpness in the

image.

 [Noise reduction]: Filter and reduce

noise in the image.

 [Tint]: Adjust the colour balance in the

image.

 [Custom tint]: Customise tint setting.

 [Pixel Plus HD] / [Pixel Precise HD]*:

Control advanced settings to fine-tune

each pixel to match surrounding pixels.

This setting produces a brilliant, high-

definition image.

- [HD Natural Motion]*: Reduce

motion judder and reproduce smooth

motion.

- [Clear LCD]*: Enable superior

motion sharpness, better black level,

high contrast with a flicker-free, quiet

image and a larger viewing angle.

- [Super resolution]: Enable

superior sharpness, especially on lines

and contours in the picture.

- [Dynamic contrast]: Set the level

at which the TV automatically enhances

details in the dark, middle and light

areas of the picture.

- [Dynamic backlight]: Reduce

power consumption by dimming the

TV backlight to match room lighting

conditions.

- [MPEG artefact reduction]:

Smooth the digital transitions in the

picture.

- [Colour enhancement]: Set the

colours to be more vivid and improve

the resolution of details in bright

colours.

- [Gamma]: Non-linear setting for

picture luminance and contrast.

- [Video contrast]: Change the

intensity of the bright areas, keeping

dark areas unchanged.

 [PC mode]: Allow picture settings to

be changed when a PC is connected to

the TV through HDMI.

If enabled, you can select [Picture

format] > [Unscaled] which provides

maximum detail for display of PC

content.

 [Light sensor]: Adjust settings

dynamically to match lighting conditions.

 [Picture format]: Change the picture

format.

 [Screen edges]: Change the picture

size.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFL5537H Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFL5537H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info