Bedienungsanleitung Philips 40PFS6909 (Seite 38 von 98) (Englisch)

561051

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Update channel packages

With

Update channel package

, you can bring back satellite

channels that were in the satellite channel list before but are

now missing. The missing channels were repositioned on the

transponder by the satellite operator. The TV must be updated

with the latest version of the channel package.

To download the latest version of the channel package . . .

- Go to the Philips support website

www.philips.com/support

and enter the type number of your TV.

- Click on

Software and drivers

and look for the file :

PredefinedSortingList

- Download the file on your computer and copy the file on

the root directory of a USB flash drive, not in a folder (if

necessary, unzip the file first).

- Plug the USB flash drive into the TV and press

and

select

Setup

and press

- Select

Satellite settings

Channel installation

Update

channel package

and press

- The TV will copy the file and ask you to start a channel

update immediately. Select

Yes

and press

. This may take a

few minutes. If you want to postpone the channel update, you

can do it later with

Setup

Search for satellite

Update

channels

- After the channel update is done, the missing channels

should be back at their former position in the satellite channel

list.

Unicable setup

The Unicable system

You can use a Unicable system to connect the antenna dish to

the TV. A Unicable system uses one cable to connect the

satellite dish to all satellite receivers in its system. Unicable is

typically used in apartment buildings. If you use a Unicable

system, the TV will ask you to assign a user band number and

corresponding frequency during the installation. You can install 1

or 2 satellites with Unicable on this TV.

If you notice some missing channels after a Unicable installation,

another installation might have been done at the same moment

on the Unicable system. Do the installation again to install the

missing channels.

User band number

In a Unicable system, each connected satellite receiver must be

numbered (e.g. 0, 1, 2 or 3 etc.).

You can find the available user bands and their number on the

Unicable switchbox. User band is sometimes shortened as UB.

There are Unicable switchboxes that offer 4 or 8 user bands. If

you select Unicable in the settings, the TV will ask you to assign

the unique user band number for its built-in satellite receiver. A

satellite receiver cannot have the same user band number as

another satellite receiver in the Unicable system.

User band frequency

Next to the unique user band number, the built-in satellite

receiver needs the frequency of the selected user band number.

These frequencies are mostly shown next to the user band

number on a Unicable switchbox.

Add a satellite

You can add an additional satellite to your current satellite

installation. The installed satellites and their channels remain

untouched. However, some satellite operators do not allow

adding a satellite.

The additional satellite should be seen as an extra, it is not your

main satellite subscription or not the main satellite of which you

use its channel package. Typically, you would add a 4th satellite

when you have 3 satellites already installed. If you have 4

satellites installed, you might consider removing one first to be

able to add a new satellite.

Settings

If you currently have only 1 or 2 satellites installed, the current

installation settings might not allow adding an extra satellite. If

you need to change the installation settings, you must redo the

complete satellite installation. You cannot use

Add satellite

if a

change of settings is needed.

To add a satellite . . .

- Press

and select

Setup

and press

- Select

Search for satellite

and press

- Select

Add satellite

and press

. The current satellites are

shown.

- Select

Add

and press

. The TV will search for new

satellites.

- If the TV has found one or more satellites, select

Install

and

press

. The TV installs the channels of the found satellites.

- To store the channels and radio stations, select

Finish

and

press

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFS6909 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFS6909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info