Bedienungsanleitung Philips 42PDL7906T (Seite 35 von 72) (Englisch, Französisch)

481159

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

EN 35

English

System audio control

If you connect an HDMI-CEC compliant

device that includes speakers, you can

choose to hear the TV from those speakers

instead of the TV speakers.

For more information about TV audio

output, see Use more of your TV > Use

EasyLink > Select speaker output (Page 36).

EasyLink remote control

You can control multiple HDMI-CEC

compliant devices with your TV remote

control.

To switch on EasyLink Remote Control, see

Use more of your TV > Use EasyLink >

Control devices simultaneously (Page 35).

Retain picture quality

If your TV picture quality is affected by the

picture-processing features of other devices,

switch on Pixel Plus Link.

To switch on Pixel Plus Link, see Use more

of your TV > Use EasyLink > Retain picture

quality (Page 36).

Maximize display for subtitled video

While you view subtitles in a video, you can

maximize the video display area. Some

subtitles can create a separate subtitle bar

under the video, which limits the video

display area. After you switch on auto

subtitle shift, the subtitles display on top of

the video image, which maximizes the video

display area.

To switch on auto subtitle shift, see Use

more of your TV > Use EasyLink >

Maximize display for video with subtitles

(Page 36).

Hear another device at standby

You can hear a connected HDMI-CEC

compliant device through the TV speakers,

even when the TV is in standby.

To switch on, see Use more of your TV >

Use EasyLink > Hear another device at TV

standby (Page 37).

What you need

To benefit from Philips EasyLink advanced

control features, make sure that you do the

following:

 Connect at least two HDMI-CEC

compliant devices through HDMI

 Configure each HDMI-CEC compliant

device properly

 Switch on EasyLink

Switch on

To switch on or off EasyLink

Note: If you do not intend to use Philips

Easylink, switch it off.

1. Press .

2. Select [Setup] > [TV settings] >

[EasyLink].

3. Select [On] or [Off], then press OK.

Control devices simultaneously

If you connect multiple HDMI-CEC devices

that support this setting, all the devices

respond to the TV remote control.

Caution: This is an advanced setting. Devices

that do not support this setting will not

respond to the TV remote control.

1. Press .

2. Select [Setup] > [TV settings] >

[EasyLink].

3. Select [EasyLink Remote Control] >

[On] or [Off].

4. Press OK to activate.

Notes:

 To switch back to TV control, press ,

then select [Watch TV].

 To control another device, press ,

then select the device from the Home

menu.

 To exit, press .

EasyLink buttons

Control HDMI-CEC compliant devices with

the following buttons on the TV remote

control.

 OK: Start, pause or resume play on the

connected device, activate a selection,

or access the device menu.

 (Previous) / (Next): Search

backwards and forwards on the

connected device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PDL7906T Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PDL7906T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info