Bedienungsanleitung Philips 42PFL3527H (Seite 21 von 61) (Englisch)

523836

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN 21

English

Sleeptimer

You can switch the TV to standby after a

specified time. During the countdown to the

specified time, you can switch off your TV

earlier or reset the sleeptimer.

1. Press .

2. Select [Setup] > [TV settings] >

[Preferences] > [Sleep timer].

3. Press the Navigation buttons to set the

sleeptimer.

The sleeptimer can be set up to 180 minutes,

in steps of ten minutes. To switch off the

sleeptimer, set it to zero minutes.

4. Press OK to activate the sleep timer.

After the specified time, the TV switches to

standby.

Child lock

To protect children from unsuitable TV

programmes, you can lock the TV or block

age rated programmes.

Set or change the child lock code

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Child lock].

3. Select [Set code] or [Change code].

4. Enter the code with the Numeric

buttons.

Tip: If you forget your code, enter '8888' to

override any existing codes.

Lock or unlock channels

1. In the child lock menu, select [Channel

lock].

2. Select the channel to lock or unlock, then

press OK.

3. If prompted, enter the child lock code

with the Numeric buttons.

4. Restart the TV to activate the lock.

Note:

If you access the channels from the channel

list, you are prompted to enter your lock

code.

Parental rating

You can set your TV to display only

programmes with age ratings lower than

your child's age. This restriction only applies

to digital channels from broadcasters that

rate their programmes according to age.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Child lock] > [Parental rating].

You are prompted to enter the child lock

code.

4. Enter the child lock code with the

Numeric buttons.

5. Select an age rating, then press OK.

All programmes above the selected age

rating are blocked.

For information on child lock codes, see Use

more of your TV > Set locks and timers >

Child lock (Page 21).

Use EasyLink

What you can do

You can get the most out of your

HDMI-CEC-compliant devices with Philips

EasyLink enhanced control features. Connect

your HDMI-CEC compliant devices through

HDMI to your TV and control them at the

same time with your TV remote control.

Note: Other brands describe HDMI-CEC

functionality differently. Some examples are

Anynet (Samsung), Aquos Link (Sharp) or

BRAVIA Sync (Sony). Not all brands are fully

compatible with Philips EasyLink.

After you have switched on Philips EasyLink,

the following features are available:

One-touch play

When you play an HDMI-CEC compliant

device, the TV switches on from standby and

switches to the correct source.

One-touch standby

When you press on the TV remote

control, the TV and all HDMI-CEC

compliant devices switch to standby mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PFL3527H Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PFL3527H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info