Bedienungsanleitung Philips 42PFL4007H (Seite 39 von 70) (Englisch)

477045

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

EN 36

Update channel list

When the TV was switched on for the first

time, a full installation of channels was

performed.

By default, when there are changes to these

channel lists, the TV updates them

automatically. You can also switch off the

automatic update or manually update the

channels.

Note: If you are prompted to enter a code,

enter '8888'.

Automatic update

To add or remove digital channels

automatically, leave the TV in standby mode.

The TV updates channels and stores new

channels everyday. Empty channels are

removed from the channel list.

Switch off the channel update message

If a channel update is performed, a message

is displayed at startup. You can switch off this

message.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Channel installation] > [Channel

update message].

4. Select [Off], then press OK.

Switch off automatic updates

In the [Channel installation] menu, select

[Automatic channel update] > [Off].

Update channels manually

1. Press .

2. Select [Setup] > [Search for channels] >

[Update channels], then press OK.

3. Follow the onscreen instructions to

update the channels.

Copy channels

ATTENTION: This feature is intended for

dealers and service personnel.

You can copy channel lists from one Philips

TV to another through a USB storage

device. You do not need to search for

channels or install them again on the second

TV. The channel list file is small enough to fit

on any USB storage device.

What you need

Two Philips TVs that have these properties:

 The same country setting

 The same year range

 The same DVB type, as indicated by

the suffix (H, K, T, or D/00) in the

model name

 The same settings for satellite channels,

including the number of LNB satellites

 The same hardware type, as indicated

by the sticker on the back of the TV

(for example Qxxx.xx.Lx)

 Compatible software versions

If the channel list cannot be copied to the

second TV, a message is displayed.

Note: If you are prompted to enter a code,

enter '8888'.

Step 1: Check the country setting

1. Switch on the first TV (with the channels

that you want to copy to the second TV).

2. Press .

3. Select [Setup] > [Search for channels] >

[Reinstall channels], then press OK.

The country menu is displayed.

4. Make a note of the current setting.

5. Press .

6. Press [Cancel] to exit.

Step 2: Copy channel list to USB

1. Connect a USB storage device to the first

TV (with the channels installed on it).

2. Press .

3. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to USB], then press OK.

The channel list is copied to the USB storage

device.

4. Disconnect the USB storage device.

Step 3: If the second TV has no channels

installed

1. Switch on the second TV (on which you

want to copy the channel list).

Initial installation starts.

2. Follow the onscreen instructions and

select the same country as the TV whose

channel list you want to copy.

3. Skip the search for channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PFL4007H Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PFL4007H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info