Bedienungsanleitung Philips 42PFL7486H (Seite 39 von 68) (Englisch)

450126

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN 39

English

 Press the Navigation buttons or

Numeric buttons to manually enter the

channel frequency.

 Select [Search] then press OK to

search for the next channel

automatically.

3. When the correct channel frequency is

entered, select [Done], then press OK.

4. Select [Store as new channel], then press

OK to store the new TV channel.

Install digital and satellite channels

Install digital channels

To improve TV reception, reposition the

antenna. You need to know the correct

frequency to tune. For best results, contact

the service provider or get a professional

installer.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Digital: Reception test] >

[Search], then press OK.

4. Press the Numeric buttons to enter the

channel frequency.

5. Select [Search], then press OK.

6. When the correct channel is located,

select [Store], then press OK.

7. Press to exit.

Notes

 If the reception is poor, reposition your

antenna and repeat the procedure.

 If you receive the channel with DVB-C,

select [Automatic] in [Symbol rate

mode] unless your cable provider

supplies you with a specific symbol rate

value.

Install satellite channels

Note: Available on certain models only.

[Search for satellite] is only available if the

TV supports DVB-S.

If your satellite receiver is connected to the

SAT connector, you can receive satellite

channels.

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Reinstall channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], and then

press OK.

Fine-tune channels

If the reception of an analogue TV channel is

poor, fine-tune the TV channel.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[Fine tune], and then press OK.

4. Press or to fine-tune the channel.

5. When you have selected the correct

channel frequency, select [Done], and then

press OK.

6. Select one of the following options, then

press OK.

 [Store current channel]: Store the

channel as the current channel number.

 [Store as new channel]: Store the

channel as a new channel number.

Reinstall channels

ATTENTION: This feature is intended for

dealers and service personnel.

You can copy channel lists from one Philips

TV to another through a USB storage

device. You do not need to search for

channels or install them again on the second

TV. The channel list file is small enough to fit

on any USB storage device.

What you need

The two Philips TVs must have:

 the same country setting,

 the same year range,

 the same DVB type, as indicated by the

suffix (H, K, T, or D/00) in the model

name,

 the same settings for satellite channels,

including the number of LNB satellites

 the same hardware type, as indicated

by the sticker on the back of the TV,

(for example Qxxx.xx.Lx), and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PFL7486H Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PFL7486H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info