Bedienungsanleitung Philips 42PUS7809 (Seite 33 von 101) (Englisch)

545575

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

start the reinstallation, press

and select

Setup

and press

Select

TV settings

General settings

Reinstall TV

Select the correct country and skip the Search for channels.

Finish the installation. When done, continue with step 2.

2 - Plug in the USB memory device that holds the channel list of

the other TV.

3 - To start the channel list upload, press

and

select

Setup

and press

4 - Select

TV settings

General settings

Channel list copy

Copy to TV

and press

. You might be asked to enter the

Child lock code of this TV.

5 - The TV notifies you if the channel list is copied to the TV

successfully. The TV will switch off and on again.

6 - Unplug the USB memory device.

DVB-T or DVB-C

DVB-T or DVB-C reception

If both DVB-T and DVB-C reception is available in your country

and if this TV is ready to receive DVB-T and DVB-C for your

country, you have selected one or the other during the channel

installation.

If you want to change the DVB setting to start a new channel

installation . . .

1 - Press

and select

Setup

and press

2 - Select

Channel settings

and press

3 - Select

Channel installation

Antenna connection

Antenna (DVB-T)

Cable (DVB-C)

and press

4 - Select the DVB setting you want.

5 - Press



, repeatedly if necessary, to close the menu.

DVB-C channel installation

For ease of use, all DVB-C settings are set to automatic.

If your DVB-C provider gave you specific DVB-C values, the

network ID or network frequency, enter these values when the

TV asks for them during installation.

It might be necessary to adjust the scanning (full or quick scan)

or enter a specific symbol rate in the

Settings

menu while

installing. To set a

Symbol rate

, first set the Symbol rate to

Manual

Channel number conflicts

In some countries, different TV channels (broadcasters) might

have the same channel number. While installing, the TV shows

the list with channel number conflicts. You need to select which

TV channel you want to install on a channel number with

multiple TV channels.

DVB-T + DVB-C

If you can use a DVB-T antenna input but also a DVB-C input,

you can set up your TV for both DVB-T and DVB-C. Install one

system followed by the other with the necessary settings.

Once each system is installed, you need to switch the antenna

input signal on the

Antenna

connection on the back of the TV

and set the TV in the appropriate system to view the installed

channels on TV.

To select the DVB-T or DVB-C setting, see above.

DVB settings

Access DVB settings

1 - Press

and select

Setup

and press OK.

2 - Select

Search for channels

and press OK.

3 - Select

Re-install Channels

4 - Select the country where you install this TV.

5 - Select

Cable (DVB-C)

6 - Select

Start to search channels

, or select

Settings for DVB-

C settings

7 - Press



, repeatedly if necessary, to close the menu.

Symbol rate mode

If your cable provider did not give you a specific

symbol rate

value to install the TV channels, leave the

Symbol rate mode

setting on

Automatic

If you received a specific symbol rate value, select

Manual

However, the value you received could be in the predefined list

of symbol rates already. Select

Predefined symbol rates

check if your value is available automatically.

Predefined symbol rates

With the

Symbol rate mode

set to

Automatic

, the TV will use 1

of the predefined symbol rates as used by most cable providers

in your country.

Symbol rate

With the

Symbol rate mode

set to

Manual

, you can enter the

symbol rate value you received from your cable provider. To

enter the value, use the number keys.

Symbol rate 2

With the

Symbol rate mode

set to

Manual

, you can enter a

second symbol rate value you received from your cable

provider. To enter the value, use the number keys.

Network frequency mode

If you intend to use the fast

Quick scan

method in

Frequency

scan

to search for channels, select

Automatic

. The TV will use 1

of the predefined network frequencies (or HC - homing

channel) as used by most cable providers in your country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PUS7809 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PUS7809

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info