Bedienungsanleitung Philips 43PUS6031 (Seite 11 von 33) (Englisch)

646896

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English - 10 -

The second way to apply TKGS installation manually

after the First Time Installation is starting an

update. To do this press the Menu button and select

Installation>TKGS Installation>Start Update. But

to be able to do so the Satellite Settings should be

done rst.

To use the update options of TKGS

TKGS feature keeps your satellite channel lists up-

to-date in three different ways.

Standby: While going into standby mode, the TV

controls the TKGS table version number whether it is

the last version or not. If any changes are detected,

TV starts to update. On the next switch-on a message

will be displayed to inform the user about the changes.

Background: When a channel is opened which isn’t

dened in the TKGS channel lists, the TV controls

the TKGS table version number whether it is the last

version or not. If any changes are detected, TV starts

to update. When the update is completed a message

will be displayed to inform the user about the changes.

Manual: An update can be started manually any

time. Press the Menu button. Highlight Installation

and press OK. In the sub menu highlight TKGS

Installation and press OK. Than select Start Update

and press OK.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process and the

channels of it will be listed on the top of the Channel

List. When nished, press OK to continue.

A dialogue screen asking to activate parental control

will be displayed. If you select Yes, parental restriction

options will be displayed. Congure as desired and

press OK when nished. Select No and press OK

to advance, if you don’t want to activate parental

restrictions.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed

on the top of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in Settings>More menu and can be turned

off/on later.

Press OK button on the remote control to continue

and the Network/Internet Settings menu will be

displayed, if you conrm the previously displayed

message asking whether you want to do the network

settings. Please refer to Connectivity section to

congure a wired or a wireless connection. After the

settings are completed press OK button to continue.

To skip to the next step without doing anything select

No and press the OK button when the message is

displayed asking whether you want to do the network

settings.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

After all the available stations are stored, scan results

will be displayed. Press OK to continue. The Edit

Channel List menu will be displayed next. You can

edit the channel list according to your preferences or

press the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

In the TKGS system, channels can be blocked by the service

provider and Audio/Video transmission will not be available

from these channels.

Using SatcoDX Feature

You can perform SatcoDX operations using the

Installation>Satelite Settings menu. In the SatcoDX

menu, there are two options regarding to the SatcoDx.

You can download or upload SatcoDX data. In order

to perform these functions a USB device must be

connected to the TV.

You can upload current services and related satellites

& transponders in TV, to a USB device.

Additionally you can download one of the SatcoDx

les stored in USB device, to the TV.

When you select one of these les, all services and

related satellites and transponders in the selected

le will be stored in the TV. If there are any installed

terrestrial, cable and/or analog services, they will be

kept and only satellite services will be removed.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if the antenna settings are

not congured properly.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

Philips 43PUS6031 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUS6031

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info