Bedienungsanleitung Philips 43PUS7202 (Seite 37 von 124) (Englisch)

664227

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Internet does not work

• If the connection to the router is OK, check the

router connection to the Internet.

The PC and Internet connection are slow

• Look in your wireless router's user manual for

information on indoor range, transfer rate and other

factors of signal quality.

• Use a high-speed (broadband) Internet connection

for your router.

DHCP

• If the connection fails, you can check the DHCP

(Dynamic Host Configuration Protocol) setting of the

router. DHCP should be switched on.

Wired Connection

What You Need

To connect the TV to the Internet, you need a

network router with a connection to the

Internet. Use a high-speed (broadband) connection

to the Internet.

Make the Connection

To make a wired connection…

1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is switched on.

3 - Press



, select All Settings and press OK.

4 - Select Wireless and Networks and

press



(right) to enter the menu.

5 - Select Wired or Wi-Fi > Connect to Network.

6 - Select Wired. The TV constantly searches for

the network connection.

7 - A message will be shown when the connection is

successful.

If the connection fails, you can check the DHCP

setting of the router. DHCP should be switched on.

**To fulfill EMC regulations, use a shielded FTP Cat.

5E Ethernet cable.

Network Settings

View Network Settings

You can view all current network settings here. The IP

and MAC address, signal strength, speed, encryption

method, etc.

To view the current network settings…

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and

press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > View Network Settings.

4 - Press



(left) repeatedly if necessary, to close

the menu.

Network Configuration

If you are an advanced user and want to install your

network with Static IP addressing, set the TV to Static

IP.

To set the TV to Static IP…

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and

press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > Network

Configuration and press OK.

4 - Select Static IP and press OK to enable Static

IP Configuration.

5 - Select Static IP Configuration and configure the

connection.

6 - You can set the number for IP

Address, Netmask, Gateway, DNS 1, or DNS 2.

7 - Press



(left) repeatedly if necessary, to close

the menu.

Switch On with Wi-Fi (WoWLAN)

You can switch this TV on from your smartphone or

tablet if the TV is in Standby. The setting Switch On

with Wi-Fi (WoWLAN) must be switched on.

To switch on WoWLAN…

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and

press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > Switch On with Wi-Fi

(WoWLAN).

4 - Select On.

5 - Press



(left) repeatedly if necessary, to close

the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 43PUS7202 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUS7202

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info