Bedienungsanleitung Philips 43PUS7334 (Seite 9 von 88) (Englisch)

691999

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

6 - Navigation and OK

Writing Text

With the keyboard on the back of the remote control,

you can write text in any text field on screen.

To write text…

1 - Select a text field if it is not yet selected.

2 - Turn the remote control keyboard facing upwards

to activate the keyboard keys. Hold the remote

control with two hands and type with both thumbs.

3 - To hide the on screen keyboard, press  BACK.

Press OK to confirm the text.

On-screen Keyboard

If you use the on-screen keyboard to enter text, you

can configure the keyboard layout to a layout you are

used to.

To open these settings…

Press  HOME, select  Settings and press OK.

5 - Select Android Settings and press OK.

6 - Select Device Preferences > Keyboard and

press OK.

7 - Select Gboard Settings > Language and

press OK. You can set your language keyboard

layout here.

8 - Press  BACK to close the menu to go back

one step.

• Best distance to operate remote control with the TV

is less than 5 m.

• When using remote control keyboard, best to hold

the remote control with the angle less than 50

degree.

• Do not block the IR ray of the remote control.

Qwerty and Azerty

The standard layout of the Remote Control Keyboard

is Qwerty.

Azerty keyboard

Depending on your region, the Remote Control

Keyboard can be set to Azerty. The Azerty characters

are shown at the top right of the relevant keys.

To set the keyboard layout to Azerty…

1 - Press  HOME, select  Settings and

press OK.

2 - Select Region and Language and

press  (right) to enter the menu.

3 - Select Remote Control Keyboard and

press OK.

4 - Select Qwerty or Azerty and press OK.

5 - Press  (left) repeatedly if necessary, to close

the menu.

3.5

IR Sensor

The TV can receive commands from a remote control

that uses IR (infrared) to send commands. If you use

such a remote control, always make sure you point

the remote control at the infrared sensor on the front

of the TV.

 Warning

Do not put any objects in front of IR sensor of the TV,

it may block the IR signal.

3.6

Batteries

If the TV does not react on a key press on the remote

control, the batteries might be empty.

To replace the batteries, open the battery

compartment on the front-bottom of the remote

control.

1 - Slide the battery door in the direction shown by

the arrow.

2 - Replace the old batteries with 2 Alkaline, type

AAA-LR03-1.5V batteries. Make sure the  and the

 ends of the batteries line up correctly.

3 - Reposition the battery door and slide it back until

it clicks.

Remove the batteries if you are not using the remote

control for a long time.

Safely dispose of your old batteries according to the

end of use directions.

For more information, in Help, select Keywords and

look up End of use.

3.7

Cleaning

Your remote control is treated with a scratch-resistant

coating.

To clean the remote control, use a soft damp cloth.

Never use substances such as alcohol, chemicals or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 43PUS7334 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUS7334

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info