Bedienungsanleitung Philips 43PUS8848 (Seite 12 von 83) (Englisch)

811076

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

Channel Installation

5.1

Satellite Installation

About Installing Satellites

Up to 4 Satellites

You can install up to 4 satellites (4 LNBs) on this TV.

Select the exact number of satellites you wish to

install at the start of the installation. This will speed up

the installation.

Unicable

You can use a Unicable system* to connect the

antenna dish to the TV. You can select Unicable for

up to 4 satellites at the start of the installation.

* Note: supports Unicable 1 (EN50494) and Unicable 2

(EN50607/JESS).

Start the Installation

Make sure your satellite dish is connected correctly

and is perfectly aligned before you start the

installation.

To start the satellite installation:

1 - Select  Settings > Channels &

Inputs > Channels > Satellite Installation and

press OK. Enter your PIN code if necessary.

2 - Select Search for Satellite and press OK.

3 - Select Search and press OK. TV will search for

satellites.

4 - Select Install and press OK. The TV shows the

current satellite installation setup.

If you want to change this setup, select Settings.

If you don't want to change the setup, select Search.

Go to step 5.

5 - In Installation System, select the number of

satellites you want to install or select one of the

Unicable systems. When you select Unicable, you

can choose the User Band Numbers and enter the

User Band Frequencies for each tuner. In some

countries, you can adjust some expert settings for

each LNB in More Settings.

6 - The TV will search for the satellites available on

the alignment of your antenna dish. This may take a

few minutes. If a satellite is found, its name and

reception strength are shown on screen.

7 - When the TV found the satellites you need,

select Install.

8 - If a satellite offers Channel Packages, the TV will

show the available packages for that satellite. Select

the package you need. Some packages offer

a Quick or Full install for their available channels,

select one or the other. The TV will install the satellite

channels and radio stations.

9 - To store the satellite setup and installed channels

and radio stations, select Finish.

Satellite Installation Settings

The satellite installation settings are preset according

to your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings:

1 - Start the satellite installation.

2 - On the screen where you can start searching for

satellites, select Configure and press OK.

3 - Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4 - When you're done, select Next and press OK.

5 - On the Settings menu, press the colour

key  Done to return to the screen to start

searching for satellites.

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB values which you can enter here.

Satellite CAMs

If you use a CAM – a Conditional Access Module with

a smart card – to watch satellite channels, we

recommend to do the satellite installation with the

CAM inserted in the TV.

Most CAMs are used to descramble channels.

Newest generation CAMs can install all the satellite

channels by themselves on your TV. The CAM will

invite you to install its satellite(s) and channels. These

CAMs not only install and descramble the channels

but also handle regular channel updates.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 43PUS8848 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUS8848

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info