Bedienungsanleitung Philips 43PUT4900 (Seite 15 von 63) (Englisch)

604500

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Switch on

4.1

On, Standby or Off

Before you switch on the TV, make sure you plugged

in the mains power in the POWER connector on the

back of the TV.

To put the TV in Standby when the indicator light is

off, press the small joystick key on the back of the TV.

The indicator will light up.

With the TV in standby, press



on the remote

control to switch the TV on.

Switch to standby

To switch the TV to Standby, press



on the remote

control.

Switch Off

To switch the TV Off, press the joystick key. The

indicator light goes off.

The TV is still connected to the mains power but

consumes very little energy.

To switch off the TV completely, disconnect the

power plug.

When disconnecting the power plug, always pull the

power plug, never the cord. Ensure that you have full

access to the power plug, power cord and outlet

socket at all times.

4.2

Keys on TV

If you lost the remote control or its batteries are

empty, you can still do some basic TV operations.

To open the basic menu…

1. With the TV switched on, press the joystick key on

the back of the TV to bring up the basic menu.

2. Press left or right to

select



Volume,



Channel or



Sources.

3. Press up or down to adjust the volume or tune to

the next or previous channel. Press up or down to go

through the list of sources, including the tuner

selection.

4. The menu will disappear automatically.

To switch the TV off, select



and press the joystick

key.

4.3

Sleep timer

With the sleep timer, you can set the TV to switch to

standby automatically after a preset time.

To set the sleep timer . . .

1. Press

and select Setup and press OK.

2. Select TV settings > General settings > Sleep

timer.

With the slider bar you can set the time to up to 180

minutes in increments of 5 minutes. If set to 0

minutes, the sleep timer is switched off.You can

always switch off your TV earlier or reset the time

during the countdown.

3. Press



, repeatedly if necessary, to close the

menu.

4.4

Switch Off Timer

If the TV receives a TV signal but you don't press a

key on the remote control during a 4 hour period, the

TV switches off automatically to save energy. Also, if

the TV does not receive a TV signal nor a remote

control command for 10 minutes, the TV switches off

automatically.

If you use the TV as a monitor or use a digital receiver

to watch TV (a Set-Top Box - STB) and you do not

use the remote control of the TV, you should

deactivate this automatic switch off.

To deactivate the Switch Off Timer …

1. Press

and select Setup and press OK.

2. Select TV settings > General settings > Switch

off timer.

3. Press



(up) or



(down) to adjust the

value. The value 0 deactivates the automatic switch

off.

4. Press



, repeatedly if necessary, to close the

menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 43PUT4900 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUT4900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info