Bedienungsanleitung Philips 43PUT4900 (Seite 24 von 63) (Englisch)

604500

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Channel installation

- Antenna, Cable

7.1

Update channels

Automatic update

If you receive digital channels, you can set the TV to

automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

Once a day, at 6 AM, the TV updates the channels

and stores new channels. New channels are stored in

the All channels list but also in the New channels list.

Empty channels are removed.

If new channels are found or if channels are updated

or removed, a message is shown at TV start up. The

TV must be in standby to automatically update

channels.

To switch off the message at start up . . .

1. Press

and select Setup and press OK.

2. Select Channel settings and press OK.

3. Select Channel installation > Channel update

message > Off.

To switch off the Automatic channel update . . .

1. Press

and select Setup and press OK.

2. Select Channel settings and press OK.

3. Select Channel installation > Automatic channel

update > Off.

Start an update

To start an update yourself . . .

1. Press

and select Setup and press OK.

2. Select Search for channels and press OK.

3. Select Update channels and follow the instructions

on screen. The update may take a few minutes.

In certain countries, the Automatic channel update is

done while watching TV or any moment when the TV

is in standby.

New channels

New channels added with the automatic channel

update are easy to find in the channel list New. The

same new channels are also stored in the All or

Radio channel list.

New channels are kept in the channel list New as

long as you don't mark them as a favourite or tune to

them.

7.2

Reinstall channels

Reinstall All Channels

You can reinstall all channels and leave all other TV

settings untouched.

If a PIN code is set, you will need to enter this code

before you can reinstall channels.

To reinstall channels…

1. Press

and select Setup and press OK.

2. Select Search for channels > Re-install

Channels and press OK.

3. Select the country where you install the TV.

4. Select Antenna (DVB-T) or Cable (DVB-C) . The

channel search may take a few minutes. Follow the

instructions on screen.

Reinstall TV

You can redo a full TV installation. The TV is

completely reinstalled.

To redo a full TV installation…

1. Press

and select Setup and press OK.

2. Select TV settings > General settings > Reinstall

TV and press OK. The installation may take a few

minutes. Follow the instructions on screen.

7.3

DVB-T or DVB-C

DVB-T or DVB-C reception

DVB Settings

Access DVB settings

1. Press

and select Setup and press OK.

2. Select Search for channels and press OK.

3. Select Re-install Channels.

4. Select the country where you install this TV.

5. Select Cable (DVB-C).

6. Select Start to search channels, or select Settings

for DVB-C settings.

7. Press



, repeatedly if necessary, to close the

menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 43PUT4900 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 43PUT4900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info