Bedienungsanleitung Philips 46PFL7605H (Seite 65 von 74) (Englisch)

450117

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN 64

 Check that the external device or

source is properly connected.

There is sound but no picture:

Check that the picture settings are correctly

set.

There is poor TV reception from an

antenna connection:

 Check that the antenna is properly

connected to the TV.

 Loud speakers, unearthed audio

devices, neon lights, high buildings and

other large objects can influence

reception quality. If possible, try to

improve the reception quality by

changing the antenna direction or

moving devices away from the TV.

 If reception on only one channel is

poor, fine tune this channel.

There is poor picture quality from

connected devices:

 Check that the devices are connected

properly.

 Check that the picture settings are

correctly set.

The TV did not save your picture settings:

Check that the TV location is set to the

home setting. This mode offers you the

flexibility to change and save settings.

The picture does not fit the screen; it is

too big or too small:

Try using a different picture format.

The picture position is incorrect:

Picture signals from some devices may not fit

the screen correctly. Check the signal output

of the device.

The picture from broadcasts is scrambled:

You may need to use a Conditional Access

Module to access content. Check with your

operator.

An "e-sticker" banner displaying

information appears on the TV display:

The TV is in [Shop] mode. Remove the e-

sticker by setting the TV to [Home] mode,

then restarting the TV. See Setup the TV >

Change other settings > TV location (Page

42) for more information.

The computer display on the TV is not

stable:

 Check that your PC uses the supported

resolution and refresh rate.

 Set the TV picture format to unscaled.

Sound issues

There is picture but no sound from the TV:

If no audio signal is detected, the TV

automatically switches the audio output off

— this does not indicate malfunction.

 Check that all cables are properly

connected.

 Check that the volume is not set to 0.

 Check that the sound is not muted.

 Check that the TV speakers setting is

on in the sound menu.

 Check that the TV audio output is

connected to the audio input on the

HDMI CEC enabled/EasyLink-compliant

HTS device. Sound should be heard

from the HTS speakers.

There is picture but sound quality is poor:

Check that the sound settings are correctly

set.

There is picture but sound comes from

one speaker only:

Verify that sound balance is set to the

center.

HDMI connection issues

There are problems with HDMI devices:

 Note that HDCP (High-bandwidth

Digital Content Protection) support can

delay the time taken for a TV to display

content from a HDMI device.

 If the TV does not recognize the HDMI

device and no picture is displayed, try

switching the source from one device

to another and back again.

 If there are intermittent sound

disruptions, check that output settings

from the HDMI device are correct.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 46PFL7605H Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 46PFL7605H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info