Bedienungsanleitung Philips 48PFK6409 (Seite 88 von 115) (Englisch)

545818

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

1 - Network

2 - Hue bridge

3 - Hue bulbs

4 - Configure bulb

Network

In this first step, you will prepare the TV to find the

Philips hue

bridge

The TV and the Philips hue bridge must use the same network.

Connect the Philips hue bridge to the router — the router of

the network the TV is using.

Switch on the hue bulbs.

To start the configuration…

1 - Press



(Ambilight) and switch Ambilight

2 - Press

and select

Setup

and press

3 - Select

TV settings

Ambilight

Ambilight+hue

and press

4 - Select

Ambilight+hue

one step further, select

and press

5 - Select

Configure Ambilight+hue

and press

If the TV is connected to your home network, it will start

looking for the Philips hue bridge immediately.

If the TV is not yet connected to your network, the TV will start

the network setup first. You must connect the TV to your home

network.

With the TV connected to your network, go to page

Hue

bridge

For more info on connecting the TV to your home network,

press



Keywords

and look up

Network, wireless

Hue bridge

In the following step, you will link up the TV with the

Philips hue

bridge

The TV can only be linked up to one hue bridge.

To link the hue bridge…

1 - With the TV connected to the network, it will show the

available hue bridges. If the TV did not find your hue bridge yet,

you can select

Scan again

and press

If the TV found the only hue bridge you have, select

and

press

If you have more than one hue bridge available, press



(up) or



(down) to select the hue bridge you want to use and then

select

and press

2 - After you pressed

, go to the

Philips hue bridge

and

press the link button in the middle of the device. This will link

the hue bridge with the TV. Do this within 30 seconds. The TV

will confirm if a hue bridge is linked to the TV.

3 - On this confirmation, select

and press

With the Philips hue bridge linked to the TV, go to page

Hue

bulbs

Hue bulbs

In the following step, you will select the

Philips hue bulbs

that

have to follow the Ambilight.

You can select a maximum of 9 Philips hue bulbs for

Ambilight+hue.

To select the bulbs for Ambilight+hue…

1 - In the

Configure Ambilight+hue

menu, select

Hue bulbs

and

press

2 - Mark the bulbs that have to follow the Ambilight. To mark a

bulb, select the bulb name and press

3 - When you’re done, select the

button and press

With the bulbs marked for Ambilight+hue, go to page

Configure bulb

In the following step, you will configure each

Philips hue bulb

To configure each hue bulb…

1 - Select the bulb name in the

Configure Ambilight+hue

and press

. The bulb you selected is blinking.

2 - First indicate where you placed the bulb relative to the TV. A

correct setting of the

Angle

will send the correct Ambilight

colour to the bulb. Press



(up) or



(down) to adjust.

3 - Press



(right) to set the distance.

4 - Secondly, indicate the

Distance

between the bulb and the

TV. The further away from the TV, the weaker the Ambilight

colour. Press



(up) or



(down) to adjust.

5 - Press



(right) to set the brightness.

6 - Finally, set the

Brightness

of the bulb. Press



(up) or



(down) to adjust.

7 - To stop configuring this bulb, select

and press

8 - In the

Configure Ambilight+hue

menu, you can select every

bulb and do the same.

9 - When all Ambilight+hue bulbs are configured, select

Finish

and press

Ambilight+hue is ready for use.

You can always change the Ambilight+hue configuration later.

To change the configuration, press

and select

Setup

settings

Ambilight

Ambilight+hue

Immersion

With

Immersion

, you can adjust the level of the Ambilight effect

for the Ambilight+hue bulbs.

To adjust the Ambilight+hue Immersion…

1 - Press

and select

Setup

and press

2 - Select

TV settings

Ambilight

Ambilight+hue

Immersion

and press

3 - Press



(up) or



(down) to adjust.

4 - Press



, repeatedly if necessary, to close the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 48PFK6409 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 48PFK6409

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info