Bedienungsanleitung Philips 48PFS8109 (Seite 14 von 121) (Englisch)

548394

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

Two Smart Cards

Some Digital TV operators can provide a second CI+ module

(CAM) and smart card. A second CAM and smart card is

needed when you want to watch one channel while recording

another channel from the same TV operator.

If you can watch the same amount of channels with each card,

both cards have identical viewing rights. If you can watch less

channels with one of the cards, the cards have non-identical

viewing rights.

If your smart cards have identical viewing rights, it does not

matter which card you put in which slot. If one of the cards has

more viewing rights than the other one, insert the card with the

most viewing rights in the slot

COMMON INTERFACE 1

. Insert

the card with less rights in

COMMON INTERFACE 2

Insert the smart cards into the CAM modules. See the

instruction you received from the operator.

To insert the CAM in the TV…

1 - Look on the CAM for the correct method of insertion.

Incorrect insertion can damage the CAM and TV.

2 - While looking at the back of the TV, with the front of the

CAM facing towards you, gently insert the CAM into the slot.

3 - Push the CAM in as far as it will go. Leave it in the slot

permanently.

When you switch on the TV, it may take a few minutes before

the CAM is activated. If a CAM is inserted and subscription fees

are paid (subscription methods can differ), you can watch the

scrambled channels supported by the CAM smart card.

The CAM and smart card are exclusively for your TV. If you

remove the CAM, you will no longer be able to watch the

scrambled channels supported by the CAM.

Passwords or PIN codes

For some CAMs, you must enter a PIN code to watch its

channels. When you set the PIN code for the CAM, we

recommend you to use the same code you are using to unlock

the TV.

To set the PIN code for the CAM…

1 - Press



SOURCES

2 - Click on the channel type you are using the CAM

for.

Antenna TV

Cable TV

Satellite TV

3 - Press



OPTIONS

and click

Common Interface

4 - Click on the TV operator of the CAM. The following screens

come from the TV operator. Look up the PIN code setting.

4.4

Set-Top Box - STB

Use 2 antenna cables to connect the antenna to the Set-top box

(a digital receiver) and the TV.

Next to the antenna connections, add an HDMI cable to

connect the Set-top box to the TV.

Alternatively, you can use a SCART cable if the Set-top box has

no HDMI connection.

Switch Off Timer

Switch off this automatic timer, if you only use the remote

control of the Set-top box. Switch this timer off to prevent the

TV from switching off automatically after a 4 hour period

without a key press on the remote control of the TV.

Help

, press the colour key



Keywords

and look up

Switch

Off Timer

for more information.

4.5

Satellite Receiver

Connect the dish antenna cable to the Satellite receiver.

Next to the antenna connection, add an HDMI cable to connect

the device to the TV.

Alternatively, you can use a SCART cable if the device has no

HDMI connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 48PFS8109 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 48PFS8109

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info