Bedienungsanleitung Philips 49PFS4131 (Seite 7 von 62) (Englisch)

646976

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

(Consumer Electronics Control) to communicate with

the connected devices. Devices must support HDMI

CEC and must be connected with an HDMI

connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure

that all HDMI CEC settings are properly set up on the

connected EasyLink devices. EasyLink might not work

with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on

different brands. Some examples are: Anynet, Aquos

Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with

EasyLink.

Example HDMI CEC branding names are property of

their respective owners.

EasyLink On or Off

You can switch EasyLink on or off. The TV comes with

the EasyLink settings switched on.

To switch off EasyLink completely…

1. Press



, select General settings and

press



(right) to enter the menu.

2. Select EasyLink, press



(right) and

select EasyLink one step further.

3. Select Off.

4. Press



(left) repeatedly if necessary, to close the

menu.

EasyLink remote control

If you want devices to communicate but you don't

want to operate them with the TV remote control, you

can switch off EasyLink Remote Control separately.

To switch EasyLink Remote Control on or off…

1. Press



, select General settings and

press



(right) to enter the menu.

2. Select EasyLink > EasyLink remote control and

press OK.

3. Select On or Off and press OK.

4. Press



(left) repeatedly if necessary, to close the

menu.

DVI to HDMI

If you still own a device that only has a DVI

connection, you can connect the device to any of

the HDMI connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a

DVI connection. Use one of the HDMI connections

and add an Audio L/R cable (mini-jack 3.5mm) to

Audio In for sound, on the back of the TV.

Copy protection

DVI and HDMI cables support HDCP (High-bandwidth

Digital Content Protection). HDCP is a copy protection

signal that prevents copying content from a DVD disc

or Blu-ray Disc. Also referred to as DRM (Digital

Rights Management).

Scart

SCART is a good quality connection.

The SCART connection can be used for CVBS and

RGB video signals but cannot be used for High

Definition (HD) TV signals. The SCART connection

combines video and audio signals. The SCART

connection also supports NTSC playback.

Audio Out - Optical

Audio Out - Optical is a high quality sound

connection.

This optical connection can carry 5.1 audio channels.

If your device, typically a Home Theatre System

(HTS), has no HDMI ARC connection, you can use this

connection with the Audio In - Optical connection on

the HTS. The Audio Out - Optical connection sends

the sound from the TV to the HTS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PFS4131 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PFS4131

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info