Bedienungsanleitung Philips 49PFS4131 (Seite 44 von 62) (Englisch)

646976

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Reinstall channels

You can always start an channel update yourself.

To start a channel update manually…

1. Press



, select Satellite installation and

press OK.

2. Enter your PIN code if necessary.

3. Select Search for satellite and press OK.

4. Select Re-install channels, and press OK.

5. Select Reinstall, and press OK.

6. Select one item you need to re-install.

7. Select Start and press OK to update channels.

This can take a few minutes.

5. Press



BACK to close the menu.

Add a satellite

You can add an additional satellite to your current

satellite installation. The installed satellites and their

channels stay untouched. However, some satellite

operators do not allow adding a satellite.

The additional satellite should be seen as an extra, it

is not your main satellite subscription or not the main

satellite of which you use its channel package.

Typically, you would add a 4th satellite when you

have 3 satellites already installed. If you have 4

satellites installed, you might consider removing one

first to be able to add a new satellite.

Settings

If you currently have only 1 or 2 satellites installed, the

current installation settings might not allow adding an

extra satellite. If you need to change the installation

settings, you must redo the complete satellite

installation. You cannot use Add satellite if a change

of settings is needed.

To add a satellite . . .

1. Press



, select Satellite installation and

press OK. Enter your PIN code if necessary.

2. Select Search for satellite and press OK.

3. Select Add satellite and press OK. The current

satellites are shown.

4. Select Add and press OK. The TV will search for

new satellites.

5. If the TV has found one or more satellites,

select Install and press OK. The TV installs the

channels of the found satellites.

6. To store the channels and radio stations,

select Finish and press OK.

Remove a satellite

You can remove one or more satellites from your

current satellite installation. You remove the satellite

and its channels. However, some satellite operators

do not allow removing a satellite.

To remove satellites . . .

1. Press



, select Satellite installation and

press OK. Enter your PIN code if necessary.

2. Select Search for satellite and press OK.

3. Select Remove satellite and press OK. The

current satellites are shown.

4. Use the arrows keys to select the satellite you

want to remove.

5. Press OK to mark a satellite to remove.

Press OK again to unmark.

6. Select Remove, press OK and confirm. The

satellites are removed.

7. Select Exit and press OK to close Remove

satellite.

Manual installation

Manual Installation is intended for expert users.

You can use Manual Installation to quickly add new

channels from a satellite transponder. You need to

know the frequency and polarization of the

transponder. The TV will install all channels of that

transponder. If the transponder was installed before,

all its channels - the former and the new ones - are

moved to the end of the channel list All.

You cannot use Manual installation if you need to

change the number of satellites. If this is needed, you

have to do a complete installation with Install

Satellites.

To install a transponder…

1. Press



, select Satellite installation and

press OK. Enter your PIN code if necessary.

2. Select Search for satellite and press OK.

3. Select Channel installation > Manual

installation and press OK.

4. If you have more than 1 satellite installed,

select LNB for which you want to add channels.

5. Set the Polarisation you need. If you set

the Symbol rate Mode to manual, you can enter

the symbol rate in Symbol rate manually.

6. Press the arrows



(up) or



(down) to adjust

the frequency, and select Done.

7. Select Search and press OK. The signal strenght

is shown on screen.

8. If you want to store the channels of a new

transponder, select Store and press OK.

Satellite installation settings

The satellite installation settings are preset according

your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings…

1. Start the satellite installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PFS4131 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PFS4131

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info