Bedienungsanleitung Philips 49PFS5501 (Seite 8 von 96) (Englisch)

634579

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Connect your

Android TV

3.1

Network and Internet

Home Network

To enjoy the full capabilities of your Philips Android

TV, your TV must be connected to the Internet.

Connect the TV to a home network with a high-speed

Internet connection. You can connect your TV

wirelessly or wired to your network router.

Connect to Network

Wireless Connection

What You Need

To connect the TV to the Internet wirelessly, you need

a Wi-Fi router with a connection to the Internet.

Use a high-speed (broadband) connection to the

Internet.

Make the Connection

Wireless

To make a wireless connection…

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > Connect to

Network and press OK.

4 - Select Wireless and press OK.

5 - In the list of found networks, select on your

wireless network. If your network is not in the list

because the network name is hidden (you switched

off the SSID broadcast of the router), select Add New

Network to enter the network name yourself.

6 - Depending on the type of router, enter your

encryption key - WEP, WPA or WPA2. If you entered

the encryption key for this network before, you can

select OK to make the connection immediately.

7 - A message will be shown when the connection is

successful.

WPS

If your router has WPS, you can directly connect to

the router without scanning for networks. If you have

devices in your wireless network that use the WEP

security encryption system, you cannot use WPS.

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and

press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > Connect to

Network and press OK.

4 - Select WPS then press OK.

5 - Go to the router, press the WPS button and return

to the TV within 2 minutes.

6 - Select Connect to make the connection.

7 - A message will be shown when the connection is

successful.

WPS with PIN Code

If your router has WPS with a PIN code, you can

directly connect to the router without scanning for

networks. If you have devices in your wireless

network that use the WEP security encryption system,

you cannot use WPS.

1 - Press



, select All Settings and press OK.

2 - Select Wireless and Networks and

press



(right) to enter the menu.

3 - Select Wired or Wi-Fi > Connect to

Network and press OK.

4 - Select WPS with PIN code and press OK.

5 - Write down the 8-digit PIN code shown on

screen and enter it in the router software on your PC.

Consult the router manual on where to enter the PIN

code in the router software.

6 - Select Connect to make the connection.

7 - A message will be shown when the connection is

successful.

Problems

Wireless network not found or distorted

• Microwave ovens, DECT phones or other Wi-Fi

802.11b/g/n devices in your proximity might disturb

the wireless network.

• Make sure that the firewalls in your network allow

access to the TV's wireless connection.

• If the wireless network does not work properly in

your home, try the wired network installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PFS5501 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PFS5501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info