Bedienungsanleitung Philips 49PFS5501 (Seite 13 von 96) (Englisch)

634579

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

EasyLink HDMI CEC

If your devices are connected with HDMI and have

EasyLink, you can operate them with the TV remote

control. EasyLink HDMI CEC must be switched On on

the TV and the connected device.

With EasyLink you can operate a connected device

with the TV remote control. EasyLink uses HDMI CEC

(Consumer Electronics Control) to communicate with

the connected devices. Devices must support HDMI

CEC and must be connected with an HDMI

connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure

that all HDMI CEC settings are properly set up on the

connected EasyLink devices. EasyLink might not work

with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on

different brands. Some examples are: Anynet, Aquos

Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with

EasyLink.

Example HDMI CEC branding names are property of

their respective owners.

Operate Devices

To operate a device connected to HDMI and set up

with EasyLink, select the device or its activity in the

list of TV connections. Press



SOURCES , select a

device connected to an HDMI connection and

press OK.

Once the device is selected, the TV remote control

can control the device. However the

keys



HOME and



OPTIONS and some other

TV keys, are not forwarded to the device.

If the key you need is not on the TV remote control,

you can select the key in the Options menu.

Press



OPTIONS and select Controls in the menu

bar. On the screen, select the device key you need

and press OK.

Some very specific device keys might not be available

in the Controls menu.

Only devices that support EasyLink Remote

Control function will respond to the TV remote

control.

EasyLink On or Off

You can switch EasyLink on or off. The TV comes with

the EasyLink settings switched on.

To switch off EasyLink completely…

1 - Press



, select All Settings and press OK.

2 - Select General Settings and press



(right) to

enter the menu.

3 - Select EasyLink, press



(right) and

select EasyLink one step further.

4 - Select Off.

5 - Press



(left) repeatedly if necessary, to close

the menu.

EasyLink Remote Control

If you want devices to communicate but you don't

want to operate them with the TV remote control, you

can switch off EasyLink Remote Control separately.

To switch EasyLink Remote Control on or off…

1 - Press



, select All Settings and press OK.

2 - Select General Settings and press



(right) to

enter the menu.

3 - Select EasyLink > EasyLink Remote

Control and press OK.

4 - Select On or Off and press OK.

5 - Press



(left) repeatedly if necessary, to close

the menu.

DVI to HDMI

If you still own a device that only has a DVI

connection, you can connect the device to any of

the HDMI connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a

DVI connection. Use one of the HDMI connections

and add an Audio L/R cable (mini-jack 3.5mm) to

Audio In for sound, on the back of the TV.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PFS5501 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PFS5501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info