Bedienungsanleitung Philips 49PFS5501 (Seite 76 von 96) (Englisch)

634579

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Satellite CAMs

If you use a CAM – a Conditional Access Module with

a smart card – to watch satellite channels, we

recommend to do the satellite installation with the

CAM inserted in the TV.

Most CAMs are used to descramble channels.

Newest generation CAMs (CI+ 1.3 with Operator

Profile), can install all the satellite channels by

themselves on your TV. The CAM will invite you to

install its satellite(s) and channels. These CAMs not

only install and descramble the channels but also

handle regular channel updates.

Channel Packages

Satellite operators can offer channel packages that

bundle free channels (free-to-air) and offer a sorting

that suits a country. Some satellites offer subscription

packages - a collection of channels you pay for.

If you choose a subscription package, the TV might

ask you to select a Quick or Full installation.

Select Quick to install the channels of the package

only or select Full to install the package and all

other available channels too. We recommend a Quick

installation for subscription packages. If you have

additional satellites that are not part of your

subscription package, we recommend a Full

installation. All installed channels are put in the

channels list All.

Unicable Setup

The Unicable System

You can use a Single Cable system, MDU or Unicable

system to connect the antenna dish to the TV. A

Single Cable system uses one cable to connect the

satellite dish to all satellite tuners in its system. A

Single Cable system is typically used in apartment

buildings. If you use a Unicable system, the TV will ask

you to assign a user band number and corresponding

frequency during the installation. You can install 1 or 2

satellites with Unicable on this TV.

If you notice some missing channels after a Unicable

installation, another installation might have been

done at the same moment on the Unicable system.

Do the installation again to install the missing

channels.

User Band Number

In a Unicable system, each connected satellite tuner

must be numbered (e.g. 0, 1, 2 or 3 etc.).

You can find the available user bands and their

number on the Unicable switchbox. User band is

sometimes shortened as UB. There are Unicable

switchboxes that offer 4 or 8 user bands. If you select

Unicable in the settings, the TV will ask you to assign

the unique user band number for each built-in

satellite tuners. A satellite tuner cannot have the same

user band number as another satellite tuner in the

Unicable system.

User Band Frequency

Next to the unique user band number, the built-in

satellite receiver needs the frequency of the selected

user band number. These frequencies are mostly

shown next to the user band number on a Unicable

switchbox.

Add a Satellite

You can add an additional satellite to your current

satellite installation. The installed satellites and their

channels remain untouched. Some satellite operators

do not allow adding a satellite.

The additional satellite should be seen as an extra, it

is not your main satellite subscription or not the main

satellite of which you use its channel package.

Typically, you would add a 4th satellite when you

have 3 satellites already installed. If you have 4

satellites installed, you might consider removing one

first to be able to add a new satellite.

Setup

If you currently have only 1 or 2 satellites installed, the

current installation settings might not allow adding an

extra satellite. If you need to change the installation

settings, you must redo the complete satellite

installation. You cannot use Add satellite if a change

of settings is needed.

To add a satellite…

1 - Press



, select All Settings and press OK.

2 - Select Channels > Satellite Installation and

press OK.

3 - Select Search for satellite and press OK.

4 - Select Add Satellite and press OK. The current

satellites are shown.

5 - Select Search and press OK. The TV will

search for new satellites.

6 - If the TV has found one or more satellites,

select Install and press OK. The TV installs the

channels of the found satellites.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PFS5501 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PFS5501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info