Bedienungsanleitung Philips 50PFL4208H (Seite 59 von 74) (Englisch)

525300

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN 59

English

Set secured connection with WPA

encryption

If you have WPA security on your router,

enter the pass phrase with the remote

control.

1. To enter the encryption key (the security

key) manually, select [Standard], then press

OK.

2. To access the onscreen keyboard, select

the text entry field, then press OK.

Set secured connection with WEP

encryption

If you have WEP security encryption, the TV

asks for the WEP encryption key in

hexadecimal numbers.

1. Locate the hexadecimal key in the router

software on your PC and make a note of the

first key in the WEP keys list.

2. Enter it on TV with the remote control.

If the security key is accepted, the TV is

connected with the wireless router.

3. If prompted, agree to the End User

Licence Agreement.

WiFi integrated

This section is for PFL42x8 TVs only.

You can connect your TV to your home

network wirelessly.

Note:

The wireless network operates in the same

2.4 GHz frequency spectrum as common

household devices, such as Dect phones,

microwave ovens or Bluetooth devices,

which can cause WiFi interference. Move

these devices away from the TV.

 For optimum WiFi performance, place

the TV at a distance of less than 10 m

from the wireless router. Avoid

obstructions such as concrete walls

between the router and the TV.

 Reception quality depends on the

location of the wireless router and your

local Internet service provider.

 To reduce network traffic, switch off

unused network equipment in the

home network.

 When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

Start wireless setup

1. Switch on your wireless network router.

2. Press on the TV remote control.

3. Select [Setup] > [Connect to network],

then press OK.

4. Follow the onscreen instructions.

WPS - Wi-Fi Protected Setup

1. If your router supports Wi-Fi Protected

Setup (WPS), press the WPS button on the

router.

2. After 2 minutes, select [WPS] on the TV,

then press OK.

The TV connects to your network. This

takes about 2 minutes.

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPS security encryption and

cannot be combined with devices on your

network that use the WEP (Wired

Equivalent Privacy) security encryption.

If you still need the WEP devices in your

network, install with [Scan] > [Custom].

Scan for routers

If you have several routers in your network,

you can select the network you need.

1. To select a specific network router, press

[Scan] on the first page of the installation.

The routers with WPS and the strongest

signal are shown first in the list on screen.

2. Select the router you need, then press

OK.

 If you are connecting to a WPS router,

select [WPS] on the TV.

 If you want to set the PIN code in your

router software to connect, select

[WPS pin] and note down the code.

 To enter the encryption key manually,

select [Standard] and enter the key

when prompted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 50PFL4208H Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 50PFL4208H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info