Bedienungsanleitung Philips 50PUK6809 (Seite 16 von 96) (Englisch)

560244

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Switch off timer

Switch off this automatic timer, if you only use the remote

control of the Set-top box. Do this to prevent the TV from

switching off automatically after a 4 hour period without a key

press on the remote control of the TV.

To switch off the Switch off timer, press

and select

Setup

and

press

Select

TV settings

General settings

Switch off timer

and

set the slider bar to

Off

4.6

Home Theatre System - HTS

Connect HTS

Use an HDMI cable to connect a Home Theatre System (HTS)

to the TV. You can connect a Philips Soundbar or an HTS with a

built-in disc player.

Alternatively, you can use a SCART cable if the device has no

HDMI connection.

HDMI ARC

If your Home Theatre System has an HDMI ARC connection,

you can use any HDMI connection on the TV to connect. With

HDMI ARC, you do not need to connect the extra audio cable.

The HDMI ARC connection combines both signals.

All HDMI connections on the TV can offer the Audio Return

Channel (ARC) signal. But once you have connected the Home

Theatre System, the TV can only send the ARC signal to this

HDMI connection.

If the Home Theatre System has no HDMI ARC connection,

add an optical audio cable (Toslink) to send the sound of the TV

picture to the Home Theatre System.

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set a

delay on most Home Theatre Systems with a disc player to

match the sound with the video.

For more information, press



Keywords

and look up

Audio

to video sync

Audio Out settings

Audio Out delay

With a Home Theatre System (HTS) connected to the TV, the

picture on TV and the sound from the HTS should be

synchronised.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to video

sync is done automatically synchronised and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust the

audio sync delay to synchronise the audio to the video. On the

HTS, increase the delay value until there is a match between

picture and sound. A delay value of 180ms may be required.

Read the user manual of the HTS. With a delay value set up on

the HTS, you need to switch off Audio out delay on the TV.

To switch off the Audio Out delay . . .

1 - Press

and select

Setup

and press

2 - Select

TV settings

Sound

Advanced

Audio out delay

3 - Select

Off

and press

4 - Press



, repeatedly if necessary, to close the menu.

Audio Out offset

If you cannot set a delay on the Home Theatre System, you can

set the TV to sync the sound. You can set an offset that

compensates for the time necessary for the Home Theatre

System to process the sound of the TV picture. You can set the

value in steps of 5ms. Maximum setting is -60ms. The Audio Out

delay setting should be switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 50PUK6809 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 50PUK6809

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info