Bedienungsanleitung Philips 50PUS7303 (Seite 50 von 90) (Englisch)

676149

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

TV placement

 Settings > All settings > Sound > TV

placement.

Select On a TV stand or On the wall to have best

sound reproduction according to the setting.

Advanced Sound Settings

Volume Control

Auto volume

 Settings > All settings

> Sound > Advanced > Auto volume.

Select DTS TruVolume to deliver a robust consistent

output.

Select Night Mode for a more comfortable quiet

listening experience.

Delta volume

 Settings > All settings

> Sound > Advanced > Delta volume.

Press the arrows  (up) or  (down) to adjust the

delta value for TV speaker volume.

Audio Out Settings

 Settings > All settings

> Sound > Advanced > Audio out.

Set the TV to play the sound on TV or on the

connected audio system.

You can select where you want to hear the TV sound

and how you want to control it.

• If you select TV speakers off, you permanently

switch off the TV speakers.

• If you select TV speakers, the TV speakers are

always on. All the sound related settings (Bass,

Treble, Surround mode etc) are applicable to this

mode.

• If you selct Headphones, the sound will be played

through headphones.

With an audio device connected with HDMI CEC,

select HDMI sound system. The TV will switch off

the TV speakers when the device is playing the

sound.

Digital Output Settings

Digital output settings are available for optical and

HDMI ARC sound signals.

Digital out format

 Settings > All settings

> Sound > Advanced > Digital out format.

Set the audio out signal of the TV to fit the sound

capabilities of the connected Home Theatre System.

• Stereo (uncompressed): If your audio playback

devices have no multichannel sound processing,

select to only output stereo content to your audio

playback devices.

• Multichannel: Select to only output 5.1 audio content

(compressed multichannel sound signal) to your

audio playback devices.

• Multichannel (bypass): Select to send original

bitstream from HDMI ARC to the connected HDMI

Sound System.

• Dolby Digital Plus: Select to output Dolby Digital

Plus or DTS content to your audio playback devices

or Home theatre system.

- Make sure your audio playback devices support

Dolby Atmos feature.

- SPDIF output (DIGITAL AUDIO OUT) will be

disabled when streaming Dolby Digital Plus content.

Digital out levelling

 Settings > All settings

> Sound > Advanced > Digital out levelling.

Adjust the loudness level from device which is

connected to digital audio output (SPDIF) or HDMI.

• Select More to have louder volume.

• Select Less to have softer volume.

Digital out delay

 Settings > All settings

> Sound > Advanced > Digital out delay.

For some Home Theatre Systems you might need to

adjust the audio sync delay to synchronise the audio

to the video. Select Off if a sound delay is set on

your Home Theatre System.

Digital out offset (Only available when Digital out

delay set to On)

 Settings > All settings

> Sound > Advanced > Digital out offset.

If you cannot set a delay on the Home Theatre

System, you can set the TV to sync the sound. You

can set an offset that compensates for the time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 50PUS7303 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 50PUS7303

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info