Bedienungsanleitung Philips 50PUS8807 (Seite 48 von 99) (Englisch)

811212

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Select Maximum, Medium, or Minimum to set the

level for removing the noise in video content.

Noise is mostly visible as small moving dots in on-

screen picture.

MPEG Artefact Reduction

 Settings > Picture > Advanced > Picture

clean > MPEG Artefact Reduction.

Select Maximum, Medium, or Minimum to have

different degress of smoothing the artefects in digital

video content.

MPEG artefacts are mostly visible as small blocks or

jagged edges in on-screen images.

Advanced Sharpness Settings

Ultra Resolution

 Settings >

Picture > Advanced > Sharpness > Ultra

Resolution.

Select On to have a superior sharpness in line edges

and details.

Colour Settings

Advanced Colour Settings

 Settings > Picture > Advanced > Colour.

Adjust the colour enhancement

 Settings > All settings

> Picture > Advanced > Colour > Colour

enhancement.

Select Maximum, Medium, or Minimum to set the

level of the colour intensity and the details in bright

colours.

Note: Not available when Dolby Vision signal is

detected.

Adjust the colour gamut

 Settings > All settings

> Picture > Advanced > Colour > Colour gamut.

Select Normal or Wide to set the type of colour

gamut.

Note: Not available when wide colour gamut signal or

Dolby Vision signal is detected.

Select the preset colour temperature

 Settings > Picture > Advanced > Colour > Co

lour temperature.

Select Normal, Warm, or Cool to set the colour

temperature for your preference.

Note: Not available when Ambient Intelligence >

Colour temperature optimization is turned on.

Whitepoint alignment

 Settings > Picture > Advanced > Colour >

Whitepoint alignment.

Customise the whitepoint alignment based on the

selected colour temperature of the picture. Press the

arrows  (up) or  (down) to adjust the value.

Note: Not available when Ambient Intelligence >

Colour temperature optimization is turned on.

Colour control (Hue and Saturation)

 Settings

> Picture > Advanced > Colour > Colour control.

Press the arrows  (up) or  (down) to adjust the

value of Hue and Saturation for the colour Red,

Yellow, Green, Cyan, Blue and Magenta. Press the

colour key  Reset to reset the picture style. If

you want to reset all value to default, select Reset

all.

Note: Available only when picture style is Calman,

Expert 1or Expert 2.

RGB only mode

 Settings

> Picture > Advanced > Colour > RGB only

mode.

Select Red, Green or Blue to switch picture as

selected colour only, or select Off to turn off RGB

mode.

Note: Available only when picture style is Calman,

Expert 1or Expert 2.

Advanced Contrast Settings

Contrast Modes

 Settings >

Picture > Advanced > Contrast > Contrast mode.

Select Normal, Optimized for picture, or Optimized

for energy savings to set the TV automatically

reduces the contrast, for best power consumption or

for best picture experience, or select Off to switch

off the adjustment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 50PUS8807 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 50PUS8807

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info