Bedienungsanleitung Philips 55OLED707 (Seite 24 von 102) (Englisch)

811125

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB values which you can enter here.

LNB Power

By default, LNB Power is set to Automatic.

22 kHz Tone

By default, the Tone is set to Automatic.

Low LO Frequency / High LO Frequency

The local oscillator frequencies are set to standard

values. Adjust the values only in case of exceptional

equipment that needs different values.

Problems

The TV cannot find the satellites I want or the TV

installs the same satellite twice

• Make sure that the correct number of satellites is set

in Settings at the start of the installation. You can set

the TV to search for One, Two or 3/4 satellites.

A dual head LNB cannot find a second satellite

• If the TV finds one satellite but cannot find a second

one, turn the dish a few degrees. Align the dish to get

the strongest signal on the first satellite. Check the

signal strength indicator of the first satellite on screen.

With the first satellite set at the strongest signal, select

Search again to find the second satellite.

• Make sure the settings are set to Two Satellites.

Changing the installation settings did not solve my

problem

• All settings, satellites and channels are only stored

at the end of the installation when you finish.

All satellite channels are gone

• If you use a Unicable system, make sure you

assigned two unique user band numbers for both

built-in tuners in the Unicable settings. It might be

that another satellite receiver in your Unicable system

is using the same user band number.

Some satellite channels seem to have disappeared

from the channel list

• If some channels seem to be gone or displaced, the

broadcaster might have changed the transponder

location of these channels. To restore the channel

positions in the channel list, you can try an update of

the channel package.

I cannot remove a satellite

• Subscription packages do not allow removing a

satellite. To remove the satellite, you have to do a

complete installation again and select another

package.

Sometimes the reception is poor

• Check if the satellite dish is solidly mounted. Strong

winds can move the dish.

• Snow and rain can degrade the reception.

HD+ OpApp

HD+ OpApp* is an app provided by HD+ for Germany

users that can run a virtual set-top box on TV. The

app has the applications and features that you

previously needed a physical set-top box to access.

You need internet connection and accept the Philips

of Use to install the HD+ OpApp. You can install the

App either using the Apps Screen or the Search for

satellites option in the Settings Menu.

If the HD+ OpApp cannot be downloaded or installed,

you may try to download again later. If problem

persists, please contact HD+.

Once the HD+ OpApp has been installed successfully,

you can start the free period. Please switch the

source to Watch Satellite after the installation. If you

have been using a CAM Module for HD+ before, you

can remove it now. If a CICAM is inserted in the TV, it

will not be used to descramble the signal when you

are watching a satellite channel.

After HD+ OpApp is installed, there are some features

will be affected.

• Recording and reminder functionalities are not

allowed for satellite channels.

• Favourite list is only available in Antenna/Cable.

• The channel selection, TV Guide, channel

information are replaced by the OpApp user interface

• Satellite channels renaming and cloning will be

disabled.

* Note: HD+ OpApp is only available for HD+

subscriber and the country setting is Germany.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55OLED707 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55OLED707

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info