Bedienungsanleitung Philips 55OLED855 (Seite 84 von 96) (Englisch)

743320

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

The TV goes back to standby after showing the

Philips startup screen

When the TV is in standby, a Philips startup screen is

displayed, then the TV returns to standby mode. This

is normal behaviour. When the TV is disconnected

and reconnected to the power supply, the startup

screen is displayed at the next startup. To switch on

the TV from standby, press  on the remote control

or on the TV.

The standby light keeps on blinking

Disconnect the power cable from the power outlet.

Wait 5 minutes before you reconnect the power

cable. If the blinking reoccurs, contact Philips TV

Consumer Care.

Channels

No digital channels found during the installation

See the technical specifications to make sure that

your TV supports DVB-T or DVB-C in your country.

Make sure that all cables are properly connected and

that the correct network is selected.

Previously installed channels are not in the channel

list

Make sure that the correct channel list is selected.

OLED Screen Care

OLED Display is state of the art technology and

combined with our Picture Quality Engine it has won

an outstanding number of awards. To ensure that

your TV always offers the best possible performance,

it will sometimes perform a display clean-up process

while in standby.

If you never put your TV in standby, you will regularly

be notified by on screen messages that the display

needs to execute this clean-up process. Please

always follow those instructions. Repeatedly

postponing this process may result in image retention,

which may void your warranty.

Your TV should be left in standby in order to execute

the cleaning process in the background.

We also recommend that you avoid continuously

displaying static images.

TV Display refreshing

To protect the screen, OLED TV need refreshing

process over time.

There are 2 types of refreshing process:

• Normal refreshing: This will take place automatically

and it takes about 10 minutes with TV in standby

mode.

• Deep refreshing: This will take about 80 minutes and

need to be triggered by consumer. During the

process, a white color horizontal line will appear on

screen for a while.

To allow OLED TV to perform refreshing properly,

please adhere to the following:

• For normal refreshing process to take place

automatically, always use remote control to switch off

TV and keep the TV power plugged.

• When normal refreshing message is shown on TV

screen, follow the onscreen recommended

instructions.

• For deep refreshing process, it can be activated

manually via Settings > General settings >

Advanced > OLED screen settings > Clear residual

image. A reminder message can also be shown on TV

to request user to perform deep refreshing, please

follow instructions and keep TV power plugged to

allow the whole process complete. It will take 80

minutes. The deep refreshing process shall only be

done when residual image is seen on screen even

after 8 hours standby. Manually performing Clear

residual image too often may reduce OLED display

life time.

• Do not touch or apply pressure on TV screen during

the refreshing process.

• Always use remote control to switch off TV and keep

the TV power plugged on when refreshing is triggered.

* Note: In order to enjoy the best picture quality this

process is essential. If the unit demonstrably did not

have the chance to complete a refreshing process on

a regular basis, we cannot accept any returns on

behalf of image residual phenomenon. This is not in

scope of the warranty.

Special Care for OLED TV

Organic LED (OLED) may experience on-screen

image retention (due to the characteristics of the

material), when an image is continuously displayed

for a long period of time or the same image is

repeatedly displayed. So it is strongly recommended

to follow the instructions to take care of OLED TV:

• Do not display any still image continuously or

display the same image for more than 10 minutes.

• Recommend to use Standard, HDR Natural or

Dolby Vision Dark as picture style in normal home

viewing condition.

• Recommend to use OLED Contrast setting 50 or

below in picture settings when playing Game or

watching TV programs with logos or clocks on any

parts of the screen.

• Switch off On Screen Display (e.g. the home menus)

of TV application program when not used.

• Switch off On Screen Display from connected

external video devices (e.g. DVD player). For details,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55OLED855 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55OLED855

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info