Bedienungsanleitung Philips 55OLED907 (Seite 60 von 101) (Englisch)

811176

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

 Settings > General

settings > Advanced > HbbTV and Operator Apps

settings > HbbTV Device ID reset.

You can reset your TV unique device identifier. A new

identifier will be created. This will replace your Device

ID with a new identifier.

OLED Screen Settings

Local image protection

 Settings > General

settings > Advanced > OLED screen settings >

Local image protection.

Set the level of protection when local still image is

displayed.

Displaying a still image for a prolonged period of time

may cause an image sticking. This phenomenon is

normal character for OLED panel. Avoid displaying a

fixed image on the TV screen for an extended length

of time.

Clear residual image

 Settings > General

settings > Advanced > OLED screen settings >

Clear residual image.

When you encounter image residual on the TV, you

can clear such image retention on-screen by

activating this function.

1 - Select Settings > General settings and

press  (right) to enter the menu.

2 - Select Advanced > OLED screen settings

> Clear residual image.

3 - Select Confirm.

The TV will be switched off until the process is

completed.

If you are recording something, the process will be

paused, and restart until the recording is completed. It

might take a few minutes.

If you turn the TV on during the process, it will be

stopped and will be restarted automatically when the

TV switches to standby at a later time.

While processing, a white line may appear on the

screen. This is normal when clearing on-screen image

retention.

Clear residual image is a deep refreshing process, it is

not for residual image prevention. It shall be manually

operated only when residual image is seen on screen

even after TV is in standby mode for at least 8 hours.

CAM Profile Name and CAM Interface

Set profile name for installed CI+/CAM

 Settings > General settings > CAM profile name.

Select the type of CI+/CAM

 Settings > General settings > CAM interface.

Select USB to enable the USB CAM, then the PCMCIA

CAM will be disabled. Select PCMCIA to enable the

PCMCIA CAM, then the USB CAM will be disabled.

Reset TV Settings and Reinstall TV

Reset all settings value to original TV settings

 Settings > General settings > Factory settings.

Redo full TV installation , and set TV status back to

the first time you switch on

 Settings > General settings > Reinstall TV.

Enter PIN code and select Yes, the TV will reinstall

completely.

All settings will be reset and installed channels will be

replaced.

The installation can take a few minute

15.6

Clock, Region, and Language

Settings

Language

 Settings > Region and language > Language.

Change the language of the TV menu and

messages

 Settings > Region and

language > Language > Menu language.

Set audio preference language

 Settings > Region and

language > Language > Primary audio, Secondary

audio.

Digital TV channels can broadcast audio with several

spoken languages for a programme. You can set a

preferred primary and secondary audio language. If

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55OLED907 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55OLED907

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info