Bedienungsanleitung Philips 55PFL4308H (Seite 30 von 62) (Englisch)

523989

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

EN 30

Channels

Automatic installation

When the TV was switched on for the first

time, a full installation of channels was

performed.

To change your language, country, and

reinstall all available TV channels, you can run

this full installation again.

Start installation

Note: If you are prompted to enter a code,

enter '8888'.

1. Press .

2. Select [Setup] > [Search for channels] >

[Reinstall channels], then press OK.

3. Select your country, then press OK.

4. Select your network, then press OK:

 [Antenna (DVB-T)]: Access free-to-air

antenna transmissions.

 [Cable (DVB-C)]: Access cable

transmissions.

5. Follow the onscreen instructions to select

other options, if any.

The start menu for channel search is

displayed.

6. Select [Start], then press OK.

7. Once the channel search is complete,

select [Finish], then press OK.

Tip: Press LIST to see the channel list.

Note: When digital TV channels are found,

the list of installed channels may display

empty channel numbers. You can rename or

reorder these channels.

Install analogue channels

You can search and store analogue TV

channels one by one.

Step 1: Select your system

Note: Skip this step if your system settings

are correct.

1. While you watch TV, press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[System], then press OK.

4. Select the system for your country or

region, then press OK.

Step 2: Search and store new TV channels

1. While you watch TV, press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[Search channel], then press OK.

4. Find the channel:

 If you know the channel frequency,

enter it with the Navigation buttons or

Numeric buttons.

 If you do not know the channel

frequency, search for the next

frequency that has a strong signal.

Select [Search], then press OK.

5. After you have found the correct channel,

select [Done], then press OK.

6. Select [Store as new channel], then press

OK to store the new TV channel.

Note: If the reception is poor, reposition

your antenna and repeat the procedure.

Install digital channels

If you know the channel frequency of the

channels you want to install, you can search

and store digital channels one by one. For

best results, contact the service provider.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Digital: Reception test] > [Search

channel], then press OK.

4. Press the Numeric buttons to enter the

channel frequency.

5. Select [Search], then press OK.

6. When the channel is found, select [Store],

then press OK.

Fine-tune analogue channels

If the reception of an analogue TV channel is

poor, you can fine-tune the TV channel.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[Fine tune], then press OK.

4. Press or to fine-tune the channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFL4308H Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFL4308H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info