Bedienungsanleitung Philips 55PFL4308H (Seite 51 von 62) (Englisch)

523989

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

EN 51

English

Channel issues

You want to install TV channels:

See Change your TV settings > Automatic

installation (Page 30) for instructions on

installing analogue or digital channels. If you

want to install satellite TV channels, see

Change your TV settings > Satellite settings

(Page 32).

No digital channels were found during the

installation:

 See the technical specifications to make

sure that your TV supports DVB-T,

DVB-C or DVB-S in your country.

 Make sure that all cables are properly

connected and that the correct

network is selected.

Previously installed channels do not appear

in the channel list:

Make sure that the correct channel list is

selected.

You want to rearrange or reorder the

channel list:

After channels have been installed, they

appear in the channel list. For information

about managing channel lists, including

rearranging channels, see Watch TV >

Manage channel lists (Page 13).

Picture issues

The TV is on, but there is no picture or the

picture is distorted:

 Make sure that the antenna is properly

connected to the TV.

 Make sure that the correct device is

selected as the display source.

 Make sure that the external device or

source is properly connected.

There is sound but no picture:

Make sure that the picture settings are set

correctly.

There is poor TV reception from an

antenna connection:

 Make sure that the antenna is properly

connected to the TV.

 Loud speakers, unearthed audio

devices, neon lights, high buildings and

other large objects can influence

reception quality. If possible, try to

improve the reception quality by

changing the antenna direction or

moving devices away from the TV.

 If reception on only one channel is

poor, fine-tune this channel.

There is poor picture quality from

connected devices:

 Make sure that the devices are

connected properly.

 Make sure that the picture settings are

set correctly.

The TV did not save your picture settings:

Make sure that the TV location is set to

Home. You can change and save settings in

this mode.

The picture does not fit the screen; it is

too big or too small:

Change to a different picture format.

The picture format keeps changing with

different channels:

Instead of the picture format [Auto zoom],

select a different picture format.

The picture position is incorrect:

Picture signals from some devices may not fit

the screen correctly. Check the signal output

of the device.

The picture from broadcasts is scrambled:

You may need a Conditional Access Module

to access content. Check with your service

operator.

An "e-sticker" banner displaying

information appears on the TV display:

The TV is in [Shop] mode. To remove the

e-sticker, set the TV to [Home] mode, then

restart the TV. See Change your TV settings

> Other settings > Home mode (Page 35).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFL4308H Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFL4308H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info