Bedienungsanleitung Philips 55PFS5709 (Seite 31 von 92) (Englisch)

561084

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Channel list copy

Introduction

Channel list copy is intended for dealers and expert users. In

some countries, Channel list copy is only available for copying

satellite channels.

With

Channel list copy

, you can copy the channels installed on

one TV onto another Philips TV of the same range. With

Channel list copy, you avoid the time-consuming channel search

by uploading a predefined channel list on a TV. Use a USB flash

drive of minimum 1 GB.

Conditions

• Both TVs are from the same year range.

• Both TVs have the same hardware type. Check the hardware

type on the TV type plate on the back of the TV. Typically

noted as Q . . . LA

• Both TVs have compatible software versions.

Current version

You can check the current version of the TV software

with

Current software info

Setup

Software settings

Copy channel list

To copy a channel list . . .

1 - Switch on the TV which has its channels installed. Plug in a

USB memory device.

2 - Press

and select

Setup

and press

3 - Select

TV settings

General settings

Channel list copy

Copy to USB

and press

. To copy the channel list from this

TV, you might be asked to enter the Child lock code you

entered during the installation.

4 - When copying is done, unplug the USB memory device.

Now you can upload the copied channel list onto another

Philips TV.

Upload channel list

Upload a copied channel list

Depending on whether your TV is already installed or not, you

must use a different way to upload a channel list.

To a TV that is not yet installed

1 - Plug in the power plug to start the installation and select

language and country. You can skip Search for channels. Finish

the installation.

2 - Plug in the USB memory device that holds the channel list of

the other TV.

3 - To start the channel list upload, press

and

select

Setup

and press

4 - Select

TV settings

General settings

Channel list copy

Copy to TV

and press

. You might be asked to enter the

Child lock code of this TV.

5 - The TV notifies you if the channel list is copied to the TV

successfully. Unplug the USB memory device.

To an already installed TV

1 - Verify the country setting of the TV. (To verify this setting,

press

and select

Setup

and press

. Select

Search for

channels

Re-install channels

and press

. Press



and

later

Cancel

to leave the Search for channels.)

If the country is correct continue with step 2.

If the country is not correct, you need to start a reinstallation. To

start the reinstallation, press

and select

Setup

and press

Select

TV settings

General settings

Reinstall TV

Select the correct country and skip the Search for channels.

Finish the installation. When done, continue with step 2.

2 - Plug in the USB memory device that holds the channel list of

the other TV.

3 - To start the channel list upload, press

and

select

Setup

and press

4 - Select

TV settings

General settings

Channel list copy

Copy to TV

and press

. You might be asked to enter the

Child lock code of this TV.

5 - The TV notifies you if the channel list is copied to the TV

successfully. Unplug the USB memory device.

DVB-T or DVB-C

DVB-T or DVB-C reception

If both DVB-T and DVB-C reception is available in your country

and if this TV is ready to receive DVB-T and DVB-C for your

country, you have selected one or the other during the channel

installation.

If you want to change the DVB setting to start a new channel

installation . . .

1 - Press

and select

Setup

and press

2 - Select

Channel settings

and press

3 - Select

Channel installation

Antenna connection

Antenna (DVB-T)

Cable (DVB-C)

and press

4 - Select the DVB setting you want.

5 - Press



, repeatedly if necessary, to close the menu.

DVB-C channel installation

For ease of use, all DVB-C settings are set to automatic.

If your DVB-C provider gave you specific DVB-C values, the

network ID or network frequency, enter these values when the

TV asks for them during installation.

It might be necessary to adjust the scanning (full or quick scan)

or enter a specific symbol rate in the

Settings

menu while

installing. To set a

Symbol rate

, first set the Symbol rate to

Manual

Channel number conflicts

In some countries, different TV channels (broadcasters) might

have the same channel number. While installing, the TV shows

the list with channel number conflicts. You need to select which

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFS5709 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFS5709

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info