Bedienungsanleitung Philips 55PFS6409 (Seite 30 von 115) (Englisch)

561063

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Pairing again

You can pair another remote control with this TV.

The method to pair a remote control is different for a remote

control already paired with another TV compared with a remote

control that is not paired yet.

•

The remote control is paired with another TV

To pair, hold the remote control close to the Philips logo (about

10cm) and press the



Red and



Blue key at the same time.

A message will appear if pairing is successful.

•

The remote control is not paired yet

To pair, hold the remote control close to the Philips logo (about

10cm) and press

. A message will appear if pairing is

successful.

For retail

To pair a new — not yet paired — TV with a remote control

which is already paired with another TV, hold the remote

control close to the Philips logo (about 10cm) and press the



Red and



Blue key at the same time. A message will

appear if pairing is successful.

Note:

If the remote control is still fail to pair the TV, press

> Setup

> TV settings > General settings > Reinstall TV, then repeat

pairing step again.

6.9

Batteries

With sliding door

If the TV does not react on a key press on the remote control,

the batteries might be empty.

To replace the batteries, open the battery compartment on the

keyboard side of the remote control.

1 - Slide the battery door in the direction shown by the arrow.

2 - Replace the old batteries with 2 type

AAA-LR03-1.5V

alkaline batteries. Make sure the + and the - ends of the

batteries line up correctly.

3 - Reposition the battery door and slide it back until it clicks.

Remove the batteries if you are not using the remote control for

a long time.

Safely dispose of your old batteries according to the end of use

directions.

For more information, press



Keywords

and look up

End of

use

With click door

The TV will notify you when the battery power of the remote

control is low.

To replace the batteries, open the battery compartment on the

keyboard side of the remote control.

1 - Use a small coin or other small, blunt object and press the

square shaped release button to open the battery lid.

2 - Slide the blue lock open in the direction shown by the arrow

and lift the lock.

3 - Replace the old batteries with 2 type

AA-LR6-1.5V

alkaline

batteries. Make sure the + and the - ends of the batteries line up

correctly.

4 - Push the blue lock down and slide it back until it clicks.

5 - Reposition the battery door and push it down until it clicks.

Put the remote control down for about 15 seconds to calibrate

the pointer.

Remove the batteries if you are not using the remote control for

a long time.

Safely dispose of your old batteries according to the end of use

directions.

For more information, press



Keywords

and look up

End of

use

6.10

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use

substances such as alcohol, chemicals or household cleaners on

the remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFS6409 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFS6409

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info