Bedienungsanleitung Philips 55PFS7509 (Seite 48 von 101) (Englisch)

548403

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

13.1

What you need

For Passive 3D sets

This is a Passive 3D TV.

To watch 3D you need to :

• Tune to a TV channel that broadcasts programmes in 3D.

• Rent a movie in 3D from an online video store with Smart TV.

• Watch a movie in 3D from a 3D Blu-ray Disc, a USB device or

computer.

You can view photos in Ultra HD resolution in 3D, from a USB

connection.

13.2

The 3D glasses

For Passive 3D sets

When a 3D programme is shown on screen, simply put on the

3D glasses to watch the programme in 3D.

Recommended viewing height

For best picture quality, when watching passive 3D, your eyes

should be level with the centre of the screen.

13.3

Care of the 3D glasses

• Do not use cleaning chemicals containing alcohol, solvent,

surfactant, or wax, benzene, thinner, mosquito repellent or

lubricant. Using these chemicals can cause discoloration or

cracks.

• Do not expose the 3D glasses to direct sunlight, heat, fire or

water. This may result in a product malfunction or fire.

• Do not drop, bend or apply force to the lenses of the 3D

glasses.

• Use a clean soft cloth (microfiber or cotton flannel) to clean

the lenses to avoid scratching them. Never spray cleaner directly

onto the 3D glasses. This may damage the electronics (for

Active 3D glasses).

13.4

Watch 3D

To experience the best 3D effect while you watch 3D

programmes:

• Sit at a distance that is at least three times the width (w) of

the TV screen.

• Do not sit more than 6m away.

3D switching

The first time a 3D signal is detected, you can set your

preference on how to start 3D in the future.

• To switch to 3D automatically, select

Automatic

• To show a notification first, select

Notification only

• To never switch to 3D, select

Never

You can still change this preference in

Setup

TV settings

Switch to 3D

Start 3D

When the TV switches to 3D or when a notification is shown

that 3D is available, put on your 3D glasses.

If the TV cannot detect the 3D signal (the 3D signal tag is

missing), the 3D programme is shown as a double image on

screen. To switch to 3D, adjust the 3D settings and select

Side

by side

Top / bottom

according to the double image

positions.

1 - Press



2 - Select

3D settings

3D - Side by side

3D - Top /

bottom

, then press

Stop 3D

To stop watching 3D, press



, select

3D settings

and select

3D is switched to 2D when you switch to another channel or

connected device.

2D to 3D conversion

You can convert any 2D programme to watch it in 3D.

1 - Press



2 - Select

3D settings

2D to 3D conversion

Adjust the 3D depth

1 - Press

and select Setup, then press OK .

2 - Select

TV settings

3D effect

3 - Select

Off

, or

4 - Press



, repeatedly if necessary, to close the menu.

Switch off 2D to 3D conversion

1 - Press



2 - Select

3D settings

, then press

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFS7509 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFS7509

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info