Bedienungsanleitung Philips 55PUS7504 (Seite 34 von 90) (Englisch)

706079

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

What You Need

To connect the TV to the Internet, you need a

network router with a connection to the

Internet. Use a high-speed (broadband) connection

to the Internet.

Make the Connection

 Settings > Wireless and Networks > Wired or Wi-

Fi > Connect to Network > Wired.

1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is switched on.

3 - The TV constantly searches for the network

connection.

4 - A message will be shown when the connection is

successful.

If the connection fails, you can check the DHCP

setting of the router. DHCP should be switched on.

**To fulfill EMC regulations, use a shielded FTP Cat.

5E Ethernet cable.

Network Settings

View Network Settings

 Settings > Wireless and Networks > Wired or Wi-

Fi > View Network Settings.

You can view all current network settings here. The IP

and MAC address, signal strength, speed, encryption

method, etc.

Network Configuration - Static IP

 Settings > Wireless and Networks > Wired or Wi-

Fi > Network Configuration > Static IP.

If you are an advanced user and want to install your

network with Static IP addressing, set the TV to Static

IP.

Network Configuration - Static IP Configuration

 Settings > Wireless and Networks > Wired or Wi-

Fi > Network Configuration > Static IP

Configuration.

1 - Select Static IP Configuration and configure the

connection.

2 - You can set the number for IP

Address, Netmask, Gateway, DNS 1, or DNS 2.

Switch On with Wi-Fi (WoWLAN)

 Settings > Wireless and Networks > Wired or Wi-

Fi > Switch On with Wi-Fi (WoWLAN).

You can switch this TV on from your smartphone or

tablet if the TV is in Standby. The setting Switch On

with Wi-Fi (WoWLAN) must be switched on.

Switch on with Chromecast

 Settings > Wireless and Networks > Wired or Wi-

Fi > Switch on with Chromecst.

Set it On to allow this TV to be switched on from a

Chromecast app on your mobile device. Power

consumption of the TV in standby status will be

higher when switched this on. The Wi-Fi (WoWLAN)

setting should be turned on firstly before you can

change the setting of Switch on with Chromecast.

Switch on Wi-Fi connection

 Settings > Wireless and Networks > Wired or Wi-

Fi > Wi-Fi On/Off.

You can switch on or off Wi-Fi connection on your

TV.

Digital Media Renderer - DMR

 Settings > Wireless and Networks > Wired or Wi-

Fi > Digital Media Renderer - DMR.

If your media files do not play on your TV, make sure

that the Digitial Media Renderer is switched on. As a

factory setting, DMR is switched on.

TV Network Name

 Settings > Wireless and Networks > Wired or Wi-

Fi > TV Network Name.

If you have more than one TV in your home network,

you can give the TV a unique name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUS7504 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUS7504

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info