Bedienungsanleitung Philips 55PUS7504 (Seite 49 von 90) (Englisch)

706079

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Delta volume

 Settings > Sound > Advanced > Delta volume.

The Delta volume setting can be used to adjust to

balance the sound level difference between the TV

channel and the HDMI source input. Press the

arrows  (up) or  (down) to adjust the delta

value for TV speaker volume.

* Note: Delta volume is available when the input

source is set to HDMI or Analogue sources and the

Audio out is set to TV speakers or HDMI sound

system.

Audio Out Settings

 Settings > Sound > Advanced > Audio out.

Set the TV to play the sound on TV or on the

connected audio system.

You can select where you want to hear the TV sound

and how you want to control it.

• If you select TV speakers off, you permanently

switch off the TV speakers.

• If you select TV speakers, the TV speakers are

always on.

With an audio device connected with HDMI CEC,

select HDMI sound system. The TV will switch off

the TV speakers when the device is playing the

sound.

Digital Output Settings

Digital output settings are available for optical and

HDMI ARC sound signals.

Digital out format

 Settings > Sound > Advanced > Digital out

format.

Set the audio out signal of the TV to fit the sound

capabilities of the connected Home Theatre System.

• Stereo (uncompressed): If your audio playback

devices have no multichannel sound processing,

select to only output stereo content to your audio

playback devices.

• Multichannel: Select to output multichannel audio

content (compressed multichannel sound signal) or

stereo audio content to your audio playback devices.

• Multichannel (bypass): Select to output Dolby

Digital Plus or DTS content to your audio playback

devices or Home theatre system.

- Make sure your audio playback devices support

Dolby Atmos feature.

- SPDIF output (DIGITAL AUDIO OUT) will be

disabled when streaming Dolby Digital Plus content.

Digital out levelling

 Settings > Sound > Advanced > Digital out

levelling.

Adjust the loudness level from device which is

connected to digital audio output (SPDIF) or HDMI.

• Select More to have louder volume.

• Select Less to have softer volume.

Digital out delay

 Settings > Sound > Advanced > Digital out

delay.

For some Home Theatre Systems you might need to

adjust the audio sync delay to synchronise the audio

to the video. Select Off if a sound delay is set on

your Home Theatre System.

Digital out offset (Only available when Digital out

delay set to On)

 Settings > Sound > Advanced > Digital out

offset.

If you cannot set a delay on the Home Theatre

System, you can set the TV to sync the sound. You

can set an offset that compensates for the time

necessary for the Home Theatre System to process

the sound of the TV picture. You can set the value in

steps of 5ms. Maximum setting is 60ms.

14.3

Ambilight Settings

Turn Ambilight On or Off

Turn off Ambilight

Press  and select Off, or you can turn Off by

pressing Settings > Ambilight > Ambilight

style > Off.

Ambilight Style

You can select the way Ambilight follows.

 Settings > Ambilight > Ambilight style.

Follow video

 Settings > Ambilight > Ambilight style > Follow

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUS7504 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUS7504

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info