Bedienungsanleitung Philips 55PUS7909 (Seite 16 von 119) (Englisch)

561036

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Audio Out Offset

If you cannot set a delay on the Home Theatre System, you can

set the TV to sync the sound. You can set an offset that

compensates for the time necessary for the Home Theatre

System to process the sound of the TV picture. You can set the

value in steps of 5ms. Maximum setting is -60ms.

The Audio Out Delay setting should be switched on.

To synchronise the sound on the TV…

1 - Press



and press



(left) for

Setup

2 - Click

Sound

Advanced

and click

Audio Out Offset

3 - Use the slider bar to set the sound offset and press

4 - Press



BACK

repeatedly if necessary, to close the menu.

Audio Out Format

If you have a Home Theatre System (HTS)

with multichannel sound processing capabilities like Dolby

Digital, DTS® or similar, set the Audio Out Format to

Multichannel. With Multichannel, the TV can send the

compressed multichannel sound signal from a TV channel or

connected player to the Home Theatre System. If you have a

Home Theatre System without multichannel sound processing,

select Stereo.

To set the Audio Out Format…

1 - Press



and press



(left) for

Setup

2 - Click

Sound

Advanced

and click

Audio Out Format

3 - Click

Multichannel

Stereo

4 - Press



BACK

repeatedly if necessary, to close the menu.

Audio Out Levelling

Use the Audio Out Levelling setting to level the volume

(loudness) of the TV and the Home Theatre System when you

switch over from one to another. Volume differences can be

caused by differences in sound processing.

To level the difference in volume…

1 - Press



and press



(left) for

Setup

2 - Click

Sound

Advanced

and click

Audio Out Levelling

3 - If the volume difference is large, select

. If the volume

difference is small, select

Less

4 - Press



BACK

repeatedly if necessary, to close the menu.

Audio Out Levelling affects both the Audio Out - Optical and

HDMI ARC sound signals.

Problems with HTS sound

Sound with loud noise

If you watch a video from a plugged in USB flash drive or

connected computer, the sound from your Home Theatre

System might be distorted. This noise is heard when the audio

or video file has DTS sound but the Home Theatre System has

no DTS sound processing. You can fix this by setting the

Audio

Out Format

of the TV to

Stereo

Press



for

Setup

Sound

Advanced

Audio Out Format

No sound

If you cannot hear the sound from the TV on your Home

Theatre System, check if you connected the HDMI cable to

HDMI ARC

connection on the Home Theatre System. All

HDMI connections on the TV are HDMI ARC connections.

4.7

Blu-ray Disc Player

Use a

High speed HDMI

cable to connect the Blu-ray Disc

player to the TV.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can

operate the player with the TV remote control.

In Help, press the colour key



Keywords

and look up

EasyLink HDMI CEC

for more information.

4.8

DVD Player

Use an HDMI cable to connect the DVD player to the TV.

Alternatively, you can use a SCART cable, if the device has no

HDMI connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUS7909 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUS7909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info