Bedienungsanleitung Philips 55PUS8857 (Seite 20 von 97) (Englisch)

811197

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Channel Installation

6.1

Satellite Installation

About Installing Satellites

Up to 4 Satellites

You can install up to 4 satellites (4 LNBs) on this TV.

Select the exact number of satellites you wish to

install at the start of the installation. This will speed up

the installation.

Unicable

You can use a Unicable system* to connect the

antenna dish to the TV. You can select Unicable for

up to 4 satellites at the start of the installation.

* Note: supports Unicable 1 (EN50494) and Unicable 2

(EN50607/JESS).

HD+ OpApp

HD+ OpApp* is an app provided by HD+ for Germany

users that can run a virtual set-top box on TV. The

app has the applications and features that you

previously needed a physical set-top box to access.

You need internet connection and accept the Philips

of Use to install the HD+ OpApp. You can install the

App either using the Apps Screen or the Search for

satellites option in the Settings Menu.

If the HD+ OpApp cannot be downloaded or installed,

you may try to download again later. If problem

persists, please contact HD+.

Once the HD+ OpApp has been installed successfully,

you can start the free period. Please switch the

source to Watch Satellite after the installation. If you

have been using a CAM Module for HD+ before, you

can remove it now. If a CICAM is inserted in the TV, it

will not be used to descramble the signal when you

are watching a satellite channel.

After HD+ OpApp is installed, there are some features

will be affected.

• Recording and reminder functionalities are not

allowed for satellite channels.

• Favourite list is only available in Antenna/Cable.

• The channel selection, TV Guide, channel

information are replaced by the OpApp user interface

• Satellite channels renaming and cloning will be

disabled.

* Note: HD+ OpApp is only available for HD+

subscriber and the country setting is Germany.

Start the Installation

Make sure your satellite dish is connected correctly

and is perfectly aligned before you start the

installation.

To start the satellite installation…

1 - Select Settings > Channels > Satellite

Installation and press OK. Enter your PIN code if

necessary.

2 - Select Search for Satellite and press OK.

3 - Select Search and press OK. TV will search for

satellites.

4 - Select Install and press OK. The TV shows the

current satellite installation setup.

If you want to change this setup, select Settings.

If you don't want to change the setup, select Search.

Go to step 5.

5 - In Installation System, select the number of

satellites you want to install or select one of the

Unicable systems. When you select Unicable, you

can choose the User Band Numbers and enter the

User Band Frequencies for each tuner. In some

countries, you can adjust some expert settings for

each LNB in More Settings.

6 - The TV will search for the satellites available on

the alignment of your antenna dish. This may take a

few minutes. If a satellite is found, its name and

reception strength are shown on screen.

7 - When the TV found the satellites you need,

select Install.

8 - If a satellite offers Channel Packages, the TV will

show the available packages for that satellite. Select

the package you need. Some packages offer

a Quick or Full install for their available channels,

select one or the other. The TV will install the satellite

channels and radio stations.

9 - To store the satellite setup and installed channels

and radio stations, select Finish.

Satellite Installation Settings

The satellite installation settings are preset according

your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings…

1 - Start the satellite installation.

2 - On the screen where you can start searching for

satellites, select Settings and press OK.

3 - Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4 - When you're done, select Next and press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUS8857 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUS8857

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info