Bedienungsanleitung Philips 55PUS8887 (Seite 47 von 97) (Englisch)

811202

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Noise is mostly visible as small moving dots in on-

screen picture.

MPEG Artefact Reduction

 Settings > Picture > Advanced > Picture

clean > MPEG Artefact Reduction.

Select Maximum, Medium, or Minimum to have

different degress of smoothing the artefects in digital

video content.

MPEG artefacts are mostly visible as small blocks or

jagged edges in on-screen images.

Advanced Sharpness Settings

Ultra Resolution

 Settings >

Picture > Advanced > Sharpness > Ultra

Resolution.

Select On to have a superior sharpness in line edges

and details.

Colour Settings

Advanced Colour Settings

 Settings > Picture > Advanced > Colour.

Adjust the colour enhancement

 Settings > All settings

> Picture > Advanced > Colour > Colour

enhancement.

Select Maximum, Medium, or Minimum to set the

level of the colour intensity and the details in bright

colours.

Note: Not available when Dolby Vision signal is

detected.

Adjust the colour gamut

 Settings > All settings

> Picture > Advanced > Colour > Colour gamut.

Select Normal or Wide to set the type of colour

gamut.

Note: Not available when wide colour gamut signal is

detected.

Select the preset colour temperature

 Settings > Picture > Advanced > Colour > Co

lour temperature.

Select Normal, Warm, or Cool to set the colour

temperature for your preference.

Whitepoint alignment

 Settings > Picture > Advanced > Colour >

Whitepoint alignment.

Customise the whitepoint alignment based on the

selected colour temperature of the picture. Press the

arrows  (up) or  (down) to adjust the value.

Colour control (Hue, Saturation and Intensity)

 Settings

> Picture > Advanced > Colour > Colour control.

Press the arrows  (up) or  (down) to adjust the

value of Hue, Saturation and Intensity for the colour

Red, Yellow, Green, Cyan, Blue and Magenta.

Press the colour key  Reset to reset the picture

style. If you want to reset all value to default,

select Reset all.

Note: Available only when picture style is Calman.

RGB only mode

 Settings

> Picture > Advanced > Colour > RGB only

mode.

Select Red, Green or Blue to switch picture as

selected colour only, or select Off to turn off RGB

mode.

Note: Available only when picture style is Calman.

Advanced Contrast Settings

Contrast Modes

 Settings >

Picture > Advanced > Contrast > Contrast mode.

Select Normal, Optimized for picture, or Optimized

for energy savings to set the TV automatically

reduces the contrast, for best power consumption or

for best picture experience, or select Off to switch

off the adjustment.

HDR Settings

If you are watching HDR programmes - programmes

recorded in HDR - there is no need to upscale to HDR

and the HDR Upscaling Control is unavailable. The TV

will automatically switched to HDR mode with

indication.

TV supports following HDR formats: Hybrid Log

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUS8887 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUS8887

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info