Bedienungsanleitung Philips 55PUT6201 (Seite 24 von 97) (Englisch)

646884

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Switching On and

Off

5.1

On or standby

Before you switch on the TV, make sure you plugged

in the mains power in the POWER connector on the

back of the TV.

With the TV in Standby, press



on the remote

control to switch the TV on. You can also press the

small joystick key on the back of the TV to switch the

TV on in case you can't find the remote control or its

batteries are empty.

Switch to standby

To switch the TV to standby, press



on the remote

control. You can also press the small joystick key on

the back of the TV.

In standby mode, the TV is still connected to the

mains power but consumes very little energy.

To switch off the TV completely, disconnect the

power plug.

When disconnecting the power plug, always pull the

power plug, never the cord. Ensure that you have full

access to the power plug, power cord and outlet

socket at all times.

5.2

Keys on TV

If you lost the remote control or its batteries are

empty, you can still do some basic TV operations.

To open the basic menu…

1 - With the TV switched on, press the joystick key on

the back of the TV to bring up the basic menu.

2 - Press left or right to select



Volume,



Channel or



Sources. Select



Demo, to start a

demo movie.

3 - Press up or down to adjust the volume or tune to

the next or previous channel. Press up or down to go

through the list of sources, including the tuner

selection. Press the joystick key to start the demo

movie.

4 - The menu will disappear automatically.

To switch the TV on standby, select



and press the

joystick key.

5.3

Sleep timer

With the Sleep Timer, you can set the TV to switch to

Standby automatically after a preset time.

To set the Sleep Timer…

1 - Press



, select General settings > Sleep

timer and press OK.

2 - With the slider bar you can set the time to up to

180 minutes in increments of 5 minutes. If set to 0

minutes, the Sleep Timer is switched off. You can

always switch off your TV earlier or reset the time

during the countdown.

3 - Press



BACK to close the menu.

5.4

Switch off timer

If the TV receives a TV signal but you don't press a

key on the remote control during a 4 hour period, the

TV switches off automatically to save energy. Also, if

the TV does not receive a TV signal nor a remote

control command for 10 minutes, the TV switches off

automatically.

If you use the TV as a monitor or use a digital receiver

to watch TV (a Set-Top Box - STB) and you do not

use the remote control of the TV, you should

deactivate this automatic switch off.

To deactivate the Switch Off Timer …

1 - Press



, select Eco settings and

press



(right) to enter the menu.

2 - Select Switch off timer and press OK.

3 - Press the arrows



(up) or



(down) to adjust

the value. The value 0 deactivates the automatic

switch off.

4 - Press



(left) repeatedly if necessary, to close

the menu.

For more information on environmentally friendly TV

settings, in Help, press the colour

key



Keywords and look up Eco settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PUT6201 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PUT6201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info