Bedienungsanleitung Philips 65OLED908 (Seite 15 von 86) (Englisch)

811058

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Channel Packages

Satellite operators can offer channel packages that

bundle free channels (free-to-air) and offer a sorting that

suits a country. Some satellites offer subscription

packages - a collection of channels you pay for.

If you choose a subscription package, the TV might ask

you to select a Quick or Full installation.

Select Quick to install the channels of the package only

or select Full to install the package and all other available

channels too. We recommend a Quick installation for

subscription packages. If you have additional satellites

that are not part of your subscription package, we

recommend a Full installation. All installed channels are

put in the channels list All.

Unicable Setup

The Unicable System

You can use a Single Cable system or Unicable system* to

connect the antenna dish to the TV. A Single Cable

system uses one cable to connect the satellite dish to all

satellite tuners in its system. A Single Cable system is

typically used in apartment buildings. If you use a

Unicable system, the TV will ask you to assign a user

band number and corresponding frequency during the

installation. You can install up to 4 satellites with

Unicable on this TV.

If you notice some missing channels after a Unicable

installation, another installation might have been done

at the same moment on the Unicable system. Do the

installation again to install the missing channels.

* Note: supports Unicable 1 (EN50494) and Unicable 2

(EN50607/JESS).

User Band Number

In a Unicable system, each connected satellite tuner must

be numbered (e.g. 0, 1, 2 or 3, etc.).

You can find the available user bands and their number

on the Unicable switchbox. User band is sometimes

shortened as UB. There are Unicable switchboxes that

offer 4 or 8 user bands. If you select Unicable in the

settings, the TV will ask you to assign the unique user

band number for each built-in satellite tuners. A satellite

tuner cannot have the same user band number as

another satellite tuner in the Unicable system.

User Band Frequency

Next to the unique user band number, the built-in

satellite receiver needs the frequency of the selected user

band number. These frequencies are mostly shown next

to the user band number on a Unicable switchbox.

Manual Channel Update

You can always start a channel update yourself.

To start a channel update manually:

1 - Select  Settings > Channels & Inputs >

Channels > Satellite Installation and press OK.

2 - Select Search for Channels and press OK.

3 - Select Update Channels and press OK. The TV will

start updating. The update may take a few minutes.

4 - Follow the instructions on screen. The update may

take a few minutes.

5 - Select Finish and press OK.

Manual Installation

Manual Installation is intended for expert users.

You can use Manual Installation to quickly add new

channels from a satellite transponder. You need to know

the frequency and polarisation of the transponder. The

TV will install all channels of that transponder. If the

transponder was installed before, all its channels - the

former and the new ones - are moved to the end of the

channel list All.

You cannot use Manual installation if you need to

change the number of satellites. If this is needed, you

have to do a complete installation with Install Satellites.

To install a transponder:

1 - Select  Settings > Channels & Inputs >

Channels > Satellite Installation and press OK.

2 - Select Manual Installation and press  (right) to enter

the menu.

3 - If you have more than 1 satellite installed,

select LNB for which you want to add channels.

4 - Set the Polarisation you need. If you set the Symbol

Rate Mode to Manual, you can enter the symbol rate

in Symbol Rate manually.

5 - Press the Arrow / navigation keys to adjust the

frequency, and select Done.

6 - Select Search and press OK. The signal strength is

shown on screen.

7 - If you want to store the channels of a new

transponder, select Store and press OK.

8 - Press  (left) repeatedly if necessary, to close the

menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 65OLED908 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 65OLED908

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info