Bedienungsanleitung Philips 65PUS8601 (Seite 14 von 128) (Englisch)

608901

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

MHL, Mobile High-Definition Link and the MHL Logo

are trademarks or registered trademarks of the MHL,

LLC.

HDMI Ultra HD

You can watch videos filmed or made in 'native' Ultra

HD resolution - 3840x2160 pixels - on this

TV. Connect devices that play Ultra HD video to one

of the HDMI connectors.

Problems with devices connected with HDMI

This is an Ultra HD TV. Some older devices -

connected with HDMI - do not recognise an Ultra HD

TV electronically and might not work correctly or

show distorted picture or sound. To avoid the

malfunctioning of such a device, you can set the

signal quality to a level the device can handle. If the

device is not using Ultra HD signals, you can switch

off Ultra HD for this HDMI connection.

To set the signal quality…

1 - Press



SETTINGS, select All Settings and

press OK.

2 - Select General Settings and press OK.

3 - Select HDMI Ultra HD and press OK.

4 - Select UHD 4:4:4/4:2:2 (highest UHD

quality), UHD 4:2:0 or Off and press OK.

5 - Press



(left) to go back one step or

press



BACK to close the menu.

HDMI CEC - EasyLink

EasyLink

With EasyLink you can operate a connected device

with the TV remote control. EasyLink uses HDMI CEC

(Consumer Electronics Control) to communicate with

the connected devices. Devices must support HDMI

CEC and must be connected with an HDMI

connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure

that all HDMI CEC settings are properly set up on the

connected EasyLink devices. EasyLink might not work

with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on

different brands. Some examples are: Anynet, Aquos

Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with

EasyLink.

Example HDMI CEC branding names are property of

their respective owners.

Operate Devices

To operate a device connected to HDMI and set up

with EasyLink, select the device - or its activity - in

the list of TV connections. Press



SOURCES, select

a device connected to an HDMI connection and press

OK.

Once the device is selected, the TV remote control

can control the device. However the keys



HOME

and



OPTIONS and some other TV keys, like



AMBILIGHT are not forwarded to the device.

If the key you need is not on the TV remote control,

you can select the key in the Options menu.

Press



OPTIONS and select Controls in the menu

bar. On the screen, select the device key you need

and press OK.

Some very specific device keys might not be available

in the Controls menu.

Only devices that support EasyLink Remote Control

function will respond to the TV remote control.

EasyLink On or Off

You can switch EasyLink on or off. The TV comes with

the EasyLink settings switched on.

To switch off EasyLink…

1 - Press



SETTINGS, select All Settings and

press OK.

2 - Select General Settings > EasyLink and press

OK.

3 - Select EasyLink and press OK.

4 - Select On or Off and press OK.

5 - Press



(left) to go back one step or press



BACK to close the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 65PUS8601 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 65PUS8601

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info