Bedienungsanleitung Philips 65PUS8601 (Seite 84 von 128) (Englisch)

608901

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

settings. See next chapter Satellite Installation

Settings.

To start searching for satellites…

1 - Select Search and press OK. The TV will search for

the satellites available on the alignment of your

antenna dish. This may take a few minutes. If a

satellite is found, its name and reception strenght are

shown on screen.

2 - If the TV shows the satellite(s) you want, select

Install and press OK. If the TV did not find the

satellite(s) you expected to find, the dish alignment

might be altered or a cable might be disconnected.

You can select Search Again and press OK.

3 - If a satellite offers Channel Packages, the TV will

show the available packages for that satellite. Select

the package you need and press OK.

4 - Select Next and press OK. Some packages offer

a Quick or Full install for their available channels,

select one or the other. The TV will install the satellite

channels and radio stations.

5 - To store the satellite setup and installed channels

and radio stations, select Finish and press OK.

Satellite Installation Settings

The satellite installation settings are preset according

your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings…

1 - Start the satellite installation.

2 - On the screen where you can start searching for

satellites, select Settings and press OK.

3 - Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4 - When you're done, select Next and press OK.

5 - On the Settings menu, press the colour key



Done to return to the screen to start searching for

satellites.

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB valeus which you can enter here.

Satellite CAMs

If you use a CAM – a Conditional Access Module with

a smart card – to watch satellite channels, we

recommend to do the satellite installation with the

CAM inserted in the TV.

Most CAMs are used to descramble channels.

Newest generation CAMs (CI+ 1.3 with Operator

Profile), can install all the satellite channels by

themselves on your TV. The CAM will invite you to

install its satellite(s) and channels. These CAMs not

only install and descramble the channels but also

handle regular channel updates.

Channel Packages

Satellites can offer channel packages that bundle free

channels (free-to-air) and offer a sorting that suits a

country. Some satellites offer subscription packages -

a collection of channels you pay for.

If you choose a subscription package, the TV might

ask you to select a Quick or Full installation.

Select Quick to install the channels of the package

only or select Full to install the package and all

other available channels too. We recommend a Quick

installation for subscription packages. If you have

additional satellites that are not part of your

subscription package, we recommend a Full

installation. All installed channels are put in the

channels list All.

Unicable Setup

The Unicable System

You can use a Single Cable system, MDU or Unicable

system to connect the antenna dish to the TV. A

Single Cable system uses one cable to connect the

satellite dish to all satellite tuners in its system. A

Single Cable system is typically used in apartment

buildings. If you use a Unicable system, the TV will ask

you to assign a user band number and corresponding

frequency during the installation. You can install 1 or 2

satellites with Unicable on this TV.

If you notice some missing channels after a Unicable

installation, another installation might have been

done at the same moment on the Unicable system.

Do the installation again to install the missing

channels.

In Help, press the colour key



Keywords and look

up Unicable, connect for more information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 65PUS8601 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 65PUS8601

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info