Bedienungsanleitung Philips 77OLED818 (Seite 48 von 87) (Englisch)

811166

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

3 - A test sound will be played and measured

through your remote control. Hold your remote

control and point it towards the TV, this can take

several seconds.

4 - Once your TV speakers are successfully

calibrated, select Test to listen to the sound before

and after the TV speakers are calibrated. Select Apply

to accept the setting or select Try again to redo the

calibration.

5 - When room calibration setup is successful and

applied, TV shall return to the Settings menu. Now go

to  Settings > Display &

Sound > Sound > Room calibration and select

Apply calibration to tune the audio output from TV

speakers.

Advanced Sound Settings

Volume Control

Auto volume

 Settings > Display &

Sound > Sound > Advanced > Auto volume.

Select On or Off to switch on or off the auto volume

adjustment.

Select Night Mode for a more comfortable quiet

listening experience.

Delta volume

 Settings > Display &

Sound > Sound > Advanced > Delta volume.

The Delta volume setting can be used to adjust to

balance the sound level difference between the TV

channel and the HDMI source input. Press

the Arrow / navigation keys to adjust the delta

value for TV speaker volume.

* Note: Delta volume is available when the input

source is set to HDMI or Analogue sources and the

Audio out is set to TV speakers or HDMI sound

system.

Dolby Atmos Notification

 Settings > Display & Sound > Sound > Dolby

Atmos notification.

Switch On or Off the Dolby Atmos notification when

Dolby Atmos content begins to play on your TV.

14.4

Audio Output

Speakers and eARC

Audio out

 Settings > Display & Sound > Audio out.

Set the TV to play the sound on TV or on the

connected audio system.

You can select where you want to hear the TV sound

and how you want to control it.

• If you select TV speakers off, you permanently

switch off the TV speakers.

• If you select TV speakers, the TV speakers are

always on.

With an audio device connected with HDMI CEC,

select HDMI sound system. The TV will switch off

the TV speakers when the device is playing the

sound.

When the DTS Play-Fi compatible device is

configured correctly and switched on, you can select

Play-Fi Wireless Home Theater to set it as audio out

device.

eARC

 Settings > Display & Sound > Audio output >

eARC.

Set eARC mode to Automatic or Off.

Digital Output Settings

Digital output settings are available for optical and

HDMI ARC sound signals.

Digital out format

 Settings > Display & Sound > Audio output

> Digital out format.

Set the audio out signal of the TV to fit the sound

capabilities of the connected Home Theatre System.

• Stereo (uncompressed): If your audio playback

devices have no multichannel sound processing,

select to only output stereo content to your audio

playback devices.

• Multichannel: Select to output multichannel audio

content (compressed multichannel sound signal) or

stereo audio content to your audio playback devices.

• Multichannel (bypass): Select to output Dolby

Digital Plus or DTS content to your audio playback

devices or Home theatre system.

- Make sure your audio playback devices support

Dolby Atmos feature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 77OLED818 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 77OLED818

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info